I have the following error message E0 F2. What does that mean?
Answer Hello Robert. Here is a link to our Repair Forum, this is a free service to our customers. Use this link to access the repair for your question. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/192445-code-eo-f2.html
Tim. My stove has a PF display and none of the buttons respond on my touch pad. But the stove top is still fucntional. Do I need to have the control panel replaced?
Answer Marques, If you have attempted to reset the power and the control/clock "When power is first supplied to the appliance, everything on the display will light up for 1 to 2 seconds, then the time of day and “PF” will appear. Press OFF/CANCEL to clear “PF” from the display.
If “PF” appears at any other time, a power failure has occurred. Press OFF/CANCEL and reset the clock if needed." Are you sure you have the proper (240 VAC) to the range terminal block on the back of the range then you will need to remove the rear panel of the control console, check for any damaged wiring, and replace the ERC/Control 9757476 . Good Luck and Thanks