Is this panel for the stainless steel model?
Yes, the control panel W10122303 is for the stainless steel model range.
My oven over heats from time to time. I replaced the sensor but still does the same thing. Do you think it is my controller?
Answer Hello Mike. You will need to check and see if the sensor is testing okay in the unit. If so, then you will need to replace the control board. The sensor should read around 1100 ohms at room temp and 1650 ohms at 350°. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html