How to change the lid switch ?
Answer George, First remove power to the machine, and turn the water faucets off. Remove the washer front panel, slide the washer out from underneath the dryer cabinet. at the rear of the top panel you'll see the round openings in the corners, remove the 3/8 inch hex head bolts inside the holes. Then remove the 3/8 inch hex head screws holding the front of the top to the cabinet (you may need to dismount the water level switch to access the bolt on the left. Once the bolts are removed and hose disconnected, you can raise the top assembly from right to left The top has pivot points on the left side and a draw string to help hold the top panel. You can then remove the one mounting screw from the top and release the tab that holds the assembly to the top then transfer the wires from the original lid switch assembly and reverse the procedure. Check and make sure you order the correct replacement parts, based on the model and serial number.