Whirlpool W10536347 Pump-Water - AppliancePartsPros.com

Total
$0.00

Part Number:	AP5650269
MFG Part Number:	W10536347
Made by:	Whirlpool

Our Price
$101.78
Regularly	You Save
~~$121.12~~	$19.34

Most Interesting

Note: This question is for the older version of this part, but we thought you might still find it helpful

My water drain pump part number is w10049390.

Guest

Answer Hello! w10049390 has been redesigned. The most updated part from the manufacturer is now W10536347. Thanks!

1 person found this answer helpful.

Was this helpful?

I'd like to purchase just the impeller for this pump. Mine is missing parts of the vanes, and I don't think it's working efficiently. The pump motor works fine - I only need the impeller plate. Help!

Mike for Model Number Whirlpool Cabrio

Answer Mike, The impeller for the pump is not sold as a separate component and you will need to replace the pump.

Was this helpful?

I just bought w10536347 drain pump and it does not have the same plastic protective covering over the motor area as in the picture and as on the orginal is it safe to use

Dennis

Answer Dennis, Yes, it is still safe to use, you may want to transfer the cover over to the replacement part, it will need modification, but things will be fine without it

Was this helpful?

Latest Questions

Is the plastic housing for pump impeller where hoses are connected sold for cabrio washer?

Bill for Model Number Part no w10049390

Answer Hello Bill. No, sorry, you will need to order and replace the pump assembly. You can not purchase just the housing.

Was this helpful?

How do I check to tell if I have a bad pump Part # AP5650269 The water does not have enough force to drain out into the drain pipe, but when i remove it and put it into a bucket on the floor the water drains. I already checked all possible places for clogs and removed the pump to check if it is bad. I am getting a reading of 12.85 Ohms when checking the pump is that correct? I saw a video on youtube showing only 0.15 Ohms when tested and that was on a new pump similar but not exactly the same as mine. The washer has been working for 2 years so its not the height of the drain on my wall, is it possible the pump is weak?

Mike for Model Number Maytag Bravos MCT

Answer Mike, The drain pump reading should be between 10.5 and 14 ohms resistance. This would indicate a good drain pump on your unit as far as the motor is concerned. You will want to check the impeller to make sure that it is not damaged or bad. Make sure that it does turn and not seized up.

Was this helpful?

The plastic housing on my Bravos pump failed (hole) so I ordered part#W10536347. The replacement showed up quickly, but the part in the box is W10238317. It looks similar but that doesn't mean it's correct, and this part number doesn't appear on the page as an alternate number. Do I need to ship the part back or is there an explanation for the part number differences? The packing slip has the matching part number. Thanks!

Jen for Model Number MTW6700TQ1

Answer Jen, The part number that is on the part is just a reference number for the manufacturer and should be the correct pump for the unit. The part number W10238317 does not come up as a valid part number and is just a manufacturer number.

Was this helpful?

Pump-Water

Questions & Answers

Appliance Compatibility Tool

Repair Help

Questions & Answers

Most Interesting

Latest Questions

Cross Reference and Model Information