Note: This question is for the older version of this part, but we thought you might still find it helpful
Can you provide the instructions for removing the tube type reservoir and replacing it with this AP3886014? Do I need more connectors, can I simply splice into the connectors and just add this one in? How do I secure it to the back of the fridge? Do I just attach it to the same spot where the tube currently is?
John for Model Number KSCS25INSS02
Answer Hi John. There are no instructions with this reservoir. The tubes need to be cut closest to the old tank in case you need them. The part will bolt to the back wall with 1/4" x 1/2" screws. Do not use too long of screws. Just make sure you pre-drill and do not go out the back of the unit. The tubes should slip in and out of the cabinet and you will need to use the coupling supplied with the waterline where the freezer door 5/16" line passes up into the lower hinge. Behind the lower kick plate. The 1/4" tube will reach all the way to the water valve and screw into the connector there. Reservoir part # W10276792. Thank You.
Note: This question is for the older version of this part, but we thought you might still find it helpful
I have the plastic tube roll reservoir for the water dispenser. Can I install this one instead and possibly get more than a half glass of cool but not cold or room temperature water? Thanks.
John for Model Number Kscs25inss02
Answer Hello John. Yes, you can install this reservoir W10276792 according to the model number you provided. Hope this helps.
Note: This question is for the older version of this part, but we thought you might still find it helpful
My reservoir does not look like this. It is simple a coiled up tube. What diameter tube is this, and how do you install it to the door dispenser.
Tom for Model Number kscs25INSS
Answer Hi Tom. Not sure what the last 2 letters of your model # is. The manufacturer has upgraded the water tank for your model, part # is W10276792. Thank you.