How do you put door back together after replacing inner glass. I am trying to remember where the retainers are screwed on to hold glass in place. Wife took apart most of door so I need lots of help.
Kevin for Model Number Kebc107kss03
Answer Kevin, Here's some Basic help. " REMOVING THE OVEN DOOR GLASS, HINGES, & HANDLE 1. Remove the oven door from the oven. 2. Place the oven door on a padded work surface with the front decorative glass facing down. 3. Remove the two top door liner screws and the two door glass bracket screws, and lift the liner assembly off the decorative door glass and handle. 4. To remove the outer door glass:
a) Remove the three outer glass holder screws and two outer glass bracket screws from the door liner. b) Lift the outer glass with the glass holder off the door liner. c) Remove the bracket. 5. To remove the center door glass, remove the bottom bracket, (it is loose), and
slide the two top corners of the glass out of the door liner slots. 6. To remove the hinges and the inner door glass: NOTE: You will have to remove both hinges to remove the inner door glass from the oven door liner. a) Lift either side of the door liner, remove the two door hinge screws, and remove the hinge. b) Lift the other side of the door liner, remove the two screws for the other hinge, and remove the hinge.
c) Lift the inner door glass liner cover off the liner. d) Remove the insulation and the inner door glass. 7. To remove the door handle, remove the two door handle screws from the bracket." That's everything from the service manual for your model number. Good Luck and Thanks
Where does this part go in the oven door go?
Guest
Answer Hello. It is located on the bottom, inside of the door. It holds the two inner glasses in place. Hope this helps.