Screw

Madisonmaniac for Model Number Maytag PAV3300AWW

Answer Hello! The agitator O-ring is part number 25-7941. The o-ring sits on top of the agitator shaft that slides into the agitator base. Hope this information helps you. Thanks! 

Shannon for Model Number PAVT920AWW

Answer Shannon, the rubber on the washer located on the screw W10309247 is all one piece. Thanks! 

Helena S. for Model Number nav5805aww

Answer Hello Helena. Sorry, but the manufacture does not offer that information. You will need to contact the manufacture for that information on the screw W10309247. Hope this helps. 

Lfive for Model Number pav2300aww

Answer Ifive, That appears to be the agitator bolt, it screws through the agitator into the metal agitator shaft, you would want to attempt to carefully drill out the broken screw, otherwise you'll need to replace the complete transmission and associated parts. Good Luck and Thanks 

Tbone for Model Number PAV2300AWW

Answer Hello Tbone. The screw has thread lock on the threads. If it is backing out, you may need to replace the screw W10309247. Hope this helps. 

Tana D. for Model Number PAVT234AWW

Answer Hello Tana! The agitator retention screw W10309247 is about 1" long and the head is approx 7/16" or 1/2" hex head. This screw matches your model PAVT234AWW. This is the screw that goes inside the agitator to hold it down. Hope this helps!