Seal

Tom for Model Number crosley cw6000w

Answer Hello Tom! Yes, that is correct. It will need the spanner wrench to remove it as well. The seal nut is threaded into the top of the tranmission. Thanks. 

1 person found this answer helpful.

Tom for Model Number CW6000W

Answer Hello Tom! The seal nut 35-5655-1 tool is part number TJ22002898. You will need to remove the part appropriately to make sure the appliance is not damaged. Thanks. 

1 person found this answer helpful.

Yash for Model Number sav3655aww

Answer Yash, You would unscrew the seal nut counter clockwise. 

Bryan for Model Number MAV208DAWW

Answer Hello Bryan, You will want to check the thrust bearing for wear and damage. If the thrust bearing checks ok then you would need a new transmission. 

Saad A for Model Number MAV7600AWW

Answer Hello Saad A., With the noise being in the spin cycle you would be looking at the tub bearings starting to go out. It may start as a whistle type noise but will start to grind. 

Buddy

Answer Hello Buddy, This will cause no issues since the "ears" are only for removal and installation of the part.