WHEN I BUY THE SEAL BASE ITEM# AP4114197, HOW CAN I PROPERLY PUT ON MY DISHWASHER PLEASE?
Answer Steve, You're going to need to remove power to the dishwasher, and you may want to turn the water off as well. " Wax Motor Detergent / Rinse Dispenser Removal 1. Disconnect power to the machine. 2. Remove the Inner Door Panel. (See paragraph Inner Door Panel removal).
3. Remove the 6 mounting screws securing the Detergent Dispenser mounting bracket." " Inner Door Panel Removal of the Inner Door Panel will allow access to the Microprocessor Board, Door Switches, Detergent / Rinse Aid Dispenser, and Vent Assembly. Removal
1. Disconnect power to the machine. 2. Open the Dishwasher door. 3. Remove the 11 Torx™ screws along the sides and top of the Inner Door Panel. 4. Separate the Inner Door Panel from the Outer Door. 5. Disconnect wires from the Vent and Dispenser Wax Motors before pulling the Inner Door Panel away from the Dishwasher."