WE replaced the belt arm and pully. New switch on door and now the dryer is not HEATING UP. PLEASE HELP
Answer Hello Shyrl. You will need to check and see if one of the wires going to the heater Y503978 or the thermostats are burnt or bad in the unit. Also, make sure the unit is not set to air fluff and the voltage coming to the dryer at the terminal block is 240 volts. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
I guess you're suppose to order two because this only goes half way around the opening?
Answer Hi Mtmom. Please call 1-877-477-7278 A.P.P. Call Center if you need to order. Thank You.