Whirlpool 68112-1 Sensor Arm - AppliancePartsPros.com

Total
$0.00

Part Number:	AP4084009
MFG Part Number:	68112-1
Made by:	Whirlpool

Our Price
$16.29
Regularly	You Save
~~$21.16~~	$4.87

Most Interesting

Bale arm is in correct place and is not broken, will stay up but will not turn off Ice maker, water inlet inside freezer has frozen up and caused water to run down the outside of the back of the refrigerator.. Should I replace the icemaker or is there another part that is controlling the shutoff. As for the inlet cup freezing do I have another problem?

Brenda for Model Number MTF2656DEW

Answer Brenda, If the bale arm is in the correct position and the icemaker is not shutting off then you would need to replace the Motor module W10190935. Also if the fill tube is frozen, you will want to clear fill tube and replace the water valve due to the water valve 61005273 is allowing a little water to flow through even when the icemaker is not calling for water.

Was this helpful?

My ice maker will not shut off when the arm is raised, arm is not broken, stays in up or down position, will replacing the arm fix this problem?

Brenda for Model Number mtf2656dew

Answer Brenda, It sounds like the arm is not in the correct position. If you pull the icemaker out and check to make sure that the arm is in the hole on the back part of the front assembly. If it is not then it needs to be in this position as this is the shut off gear.

Was this helpful?

I have a Whirlpool refrigerator and the shut off bale wire is not working on the ice maker. There's no play in it. It doesn't stay up. Do I replace the wire connection or the actual wire?

Denise D.

Answer Hello Denise, The problem is internal in this case so the ice maker assembly or the motor module will require replacement. We normally supply a part number but, with no model number, since appliance parts are model specific, we need the model number to provide you with the correct part number. You can either re-post with the verified model number or you can call in and one of our representatives will be happy to look up the part number for you.

Was this helpful?

Latest Questions

This arm fell off and I can't see inside to reattach it. Does the cover of the box come off, and if so, how? What is the best way to reattach it?

James for Model Number RB21KA4AF

Answer Hello James. If you use a small mirror you can see the slot that the bale arm goes into. No disassembly is required to install this at all.

Was this helpful?

My ice shut off arm has fallen off. how do i re-attach? can i take off cover of the sencor box? (if so how)

James for Model Number RB21KA4AF

Answer James, You don't really need to remove the mechanism cover, But if you want to, you can use a flat blade screwdriver and insert it into the slots molded into the bottom of the mechanism and twist. If anything, you may want to remove and disconnect the icemaker. The 90 dgr. bend in the arm will be inserted in the round opening of the water inlet housing 628356 and the other(wiggly) end will be inserted into the slot of the white nylon hub on the backside of the mechanism control head D7824706Q. you have to alihn evrything first, then press the arm into the hub, until it seats and "clicks" into place. Thanks and Good Luck

Was this helpful?

Which shut off arm is a replacement for my icemaker 4319743 on Kenmore model 1069517650 side by side?

William S. for Model Number Ice maker 4319743 shut off arm replacement

Answer Hello William! The shut off arm used on your Kenmore model 106.9517650 is part number 2304354. Thanks!

Was this helpful?

Sensor Arm

Questions & Answers

Appliance Compatibility Tool

Repair Help

Questions & Answers

Most Interesting

Latest Questions

Cross Reference and Model Information