How does part 2310140 fit with parts 282402 and part 2214067 fit into part 2225785?
Answer Martha, Some of the part numbers you supplied were incorrect and could not be cross referenced. Apparently there is an issue with your refrigerator compressor. We don't understand the need for a wire harness 2310140 unless it was cut or damaged. On the body or the compressor W10309988 there are three(3) pins protruding from the housing, these pins are the compressor motor windings and usually take the appearnce of a triangle or pyramid. The Overload 2214067 attaches to the top pin by the circular attahment on the top. The Relay 4387913 would attach to the lower two(2) pins, and you may need a capacitor 4387764 . But the start device 8201769 contains both, the overload and relay and will plug onto the three pins, but you would need to order the capacitor 2169373 and slide it onto the start device pin and slide it back until the terminals insert and lock into the slots on the run device. We'll send you the wiring information and taht should be helpful in wiring the components