Sump Housing

Nick for Model Number MDB7609AWB2

Answer Hi Nick. Remove power. Remove the pump/sump assy. and see if the impeller and seal kit part # 8193951 needs replaced. If there is debris in the impeller then you need to replace it. You need to replace the motor seals also so they seal into the sump area again. Thank You. 

Tim for Model Number Du1055XTpS4

Answer Hello Tim. Remove the lower spray arm and uninstall the dishwasher. Then lay the unit on it's back and remove the three clips holding the sump in place. Unplug all wires and remove all hoses attached to the assembly. Push the sump assembly into the dishwasher tub and remove the sump assembly W10237169 from the unit. Hope this helps. 

Jim for Model Number whirlpool DU1100XTPSB

Answer Hello Jim. You will need to check and see if the drain hose is partially clogged, causing a slow drain. If it is clear, you will need to replace the drain pump 8558995. Hope this helps.