Support

Jason for Model Number 110.46462500

Answer Jason, No there is no specific torque specification for the spinner shaft nut. A little "Loctite" and 30 to 35 ft.lbs. of torque, should be more than adequate. 

Chris for Model Number ghw9300pw4

Answer Chris, the manufacturer does not offer the support separate from the basket W10250573 on model GHW9300PW4. Thanks. 

Gary S. for Model Number WFW9150WW02

Answer Hello Gary. You will need to order and replace the outer tub assembly W10285625 for the bearings. 

Edwin for Model Number ghw9100lw1

Answer Hello Edwin, I cannot find any references from that part to your model number so, I have to advise that it will not work. 

Caleb for Model Number wfw9150wwoo

Answer Hello Caleb. You need to check and see if the bearings are bad in the unit. If so, you will need to order and replace the outer tub assembly W10285625 in the unit. 

Nick L. for Model Number WFW8300SW05

Answer Hello Nick. No, based on the information you will need to replace the outer tub assembly W10364247. The bearings are bad in the unit. Hope this helps.