After 4or 5 load of drying,will not start. After sitting for maybe a hour it will start to work.
Answer Hello D. Based on the information you provided, it sounds like the bearings are bad in the motor and the motor W10410999 must be replaced. Hope this helps.
The dryer will run but no heat. The heating element shows to be good.
Answer Hello Shorty. Check and make sure you have 240 volts coming to the dryer. Check and make sure the unit is not set to Air Fluff. Also check the thermal fuses 303396 and see if they are good. You can test these with a multi-meter TJMA-DM1. They should read closed for continuity. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html