I only get warm water regardless of the temperature I select. Do I need to replace the switch that selects temperature or the sensor
Answer Tim, You're on track, It's most likely the water temperature switch W10179666 the "sensor" is internal of the water inlet valve W10175893 and seldom fails. Check and make sure there are no loose connections or corrosion on the temperature switch connector pins, the replace the switch, it's more susceptible to failure.
Why is the machine stuck on spin. It will not start at all. Maytag Centennial top load.
Answer Hello Cynthia. Check and see if the lid switch is bad on the unit. Also, make sure there is power coming to the washer. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Hi, when I turn on my washer I only get hot water even in the cold position Thank you
Answer Hello Miguel,
You will want to check your water temperature thermistor. At 77 degrees it should read between 49 and 51kohms. If not reading this then the thermistor is faulty and needs to be replaced.