How do I remove and replace the above tank coil reservoir? I cannot remove the plastic cover.
Answer Hello Jon,
Remove the end of the tank from the bottom of the water inlet valve, (this will be the large water line 3/8 inch), and the other end from the bottom of the door connector. Open the door and remove the shelving that is in the way. The cover should have a screw in it that will need to be removed. Remove the screw that mounts the tank and pull the water lines up through the refrigerator floor. Insert the ends of the new tank into the holes and route them as the old ones were routed and reconnect them. Be sure to check for leaks before reassembly of shelving and the rear cover.