Whirlpool 8203546 Terminal Block - AppliancePartsPros.com

Total
$0.00

Part Number:	AP3841238
MFG Part Number:	8203546
Made by:	Whirlpool

Our Price
$11.70
Regularly	You Save
~~$14.95~~	$3.25

Most Interesting

I tried cleaning my oven and the words check fuse 2 where is it located?

Peggy for Model Number Whirpool range RF367LKVO

Answer Hello Peggy, Based on the model number provided there is no fuse on this unit. You will want to double check the model number.

Was this helpful?

What is the causes of the burned terminal block?

Wilson for Model Number YXFE381LVS-0

Answer Hello Wilson, Normal causes for a burnt terminal block are loose wiring or bad part.

Was this helpful?

I need to replace my terminal block. Does the replacement part come with the screws, nuts, washers etc? If it doesn't can I order them through you? On my old terminal, couple are fused together and need to be replaced. Do you think the Power cord should be replaced? There is no real sign of wear. and where it hooks up to the terminal block the connectors look good. Thanks, Troy

Troy T. for Model Number rf365bxvw0

Answer Hello Troy! No, the terminal block 8203546 does not include the nut 112432 or screws 33002973. If the power cord is ok then you should not have to replace it. Thanks.

Was this helpful?

Latest Questions

Oven heating element gets very, very hot and will not turn off. We had to disconnect the range and then disconnect the heating element so we can use the range. Is this caused by the Terminal block?

Robert Lane for Model Number RF3661XDW O

Answer Robert, It could be, but it's not likely, You may have a shorted element or element wire, or a "stuck" relay on the ERC/Control 8190664 . You'll need to turn power off or unplug the power cord, slide the range out, remove both back panels and check for shorted, burnt, damaged wires and connections. If all's OK, you'll need to replace the ERC/Control. Good Luck and Thanks

Was this helpful?

I need a terminal block and ground strap. Does this terminal block come with a ground strap? If not do you have the ground strap separately?

Teresa for Model Number RF366PXYN

Answer Teresa, You have the proper part number for the terminal block 8203546 and the ground strap part number is 3169573 , but it is no longer available. You could use a short piece of green colored 8 or 10 guage wire and attach it to the middle terminal or the block and the ground screw inside the junction box. You may want to contact the APP customer service line and place your order through the office, so they can verify the availability of the ground strap part. Good Luck and Thanks

Was this helpful?

We will be moving the oven tomorrow AM to inspect the terminal block. When the oven is on, there is a strong Bakelite smell. If the wiring and block show signs of disinteration, can I also order wiring with proper gauge and coating from you? Can I get assistance over the phone or internet if I need advise on installation? Thanks Bob

Bob G. for Model Number KitchenAid KGSC308LSSO

Answer Hi Bob. Normally this smell will only be associated with your house outlet. I have researched an can not find any wiring harness replacements. Thank you.

Was this helpful?

Terminal Block

Questions & Answers

Appliance Compatibility Tool

Repair Help

Questions & Answers

Most Interesting

Latest Questions

Cross Reference and Model Information