Is the thermistor a NO or NC switch? Tested mine using meter but is not reading.
Answer Hello Froggy,
The thermal fuse should always read as a closed circuit. If it is open then it is bad.
My dryer wont heat up. I have unplugged and plugged back in. Cleaned vent.
Answer Hello Cindy! This answer was located on our Repair Forum, this is a free service in which technicians will assist with answering repair questions for our customers. Please use this link to assist in your repair. Hope this helps, thanks! http://forum.appliancepartspros.com/dryer-repair/247828-dryer.html
When I turn on my dryer on it cuts off, it gets too hot. Is this due to the thermistor or the element?
Answer Hello Bobby! Check your venting system and make sure it is not clogged. Try doing a load without the vent hooked up and see if the same issue occurs. It could be due to the thermistor or the element, however, before changing any parts we would recommend testing the unit without the vent. Hope this helps.