I did what you suggested and changed the sensor unfurtunately that was not the problem. Could it be the circut board and if so how do I get to it. I would appreciate your respounse to this. Anthony.
Answer Hello Anthony. The control board is located behind the control panel. You will need to remove the panel screws to access it. There is a spark module there as well. You will need to test and see if the spark module is getting 120 volts from the board, to see if you are dealing with a bad control board or spark module. Test at the bake connector on the spark module, when the oven should be reigniting for the heat. If the 120 vots is there, then you will need to change the module. Hope this helps.