The washer continues to the next cycle without stopping. Is the timer at fault?
Answer Michael, Yes, the timer 37929 is most likely at fault. But before you replace it, check and make sure the washer tub drains completely and the water level switch 40077201 resets to the empty position. A erratic circuit from the water level switch can cause the timer motor to remain active and advance through the other cycles.
No agitation on reg cycle and perm press cycle. Seems to be working sometimes on delecate cycle. Timer?
Answer Hello Bob. Yes, based on the information you provided, it sounds like the timer 37929 is bad and will need to be replaced. Hope this helps.