Washer start, water come in,wash cycle complete,then it stops. Will not go to next cycle, which is to pump water out.I tried the other cycles, it will agitate but will not go to next cycle. I am stuck. Can u help?? Thanks.
Answer Errol, Your first check needs to be at the lid switch assembly 3949247 and strike 358684. The washer is designed to fill and agitate with the lid open or closed. But the washer will not spin or drain unless the lid is down ( the lid switch is activated). Check and make sure the "strike" is not broken or missing, then check or replace the lid switch assembly.
The drain pump does not work on the standard wash cycle but it does work on the other two cycles on the dial. Does this sound like a burned contact in the timer?
Answer Hello Rick,
This makes no sense at all since the drain pump is not electrical, but mechanical. Of course I am referring to the model number you provided. If this is not the correct model number, you should verify the model number from the unit you are servicing and repost. The way the pump is mounted to the motor on this model, the cycle makes no difference at all. The drain pump will either work or it will not work.