Washer fills and agitates, but will not pump water out.
Answer Hello JD. You will need to check and see if the lid switch is bad on the unit and is preventing it from spinning. Hope this helps.
Works fine but wont go past rinse cycle.
Answer Hello Cameron. Check and make sure the lid switch 8318084 is good and the water valve 285805 is letting in cold water. If either is bad, they will need to be replaced, and can cause the problem you are having. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
It always drains after fill.
Answer Hello Allen. If the unit is filling up with water and is draining out as it fills, you will need to check and see if the drain hose is siphoning out the water in the unit. Hope this helps.