The oven will not put heat when it needs to .Shows temperature of 105 F. I have to turn it on and off about 10 times before starts working .What should I do to fix it?
You will want to check to see if the igniter is working. To do this you will test for 3.2-3.6 volts AC at the gas safety valve with the igniter turned on. If the voltage is there, you have a bad safety valve. If the voltage is low, you have a weak igniter and the igniter will need to be replaced. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
The front left burner doesn't work any longer. I still hear the "clicking" trying to ignite it, but no spark, no flame. All other 3 burners are working fine. Any ideas? Thanks!
Answer Hello Terry,
You will want to make sure that the ignitor is not cracked or broken. If it is then it will need to be replaced. Check to make sure that the ignitor is set properly in the burner as to be able to arch and spark. A lot of times when cleaning unit the ignitor can become out of position due to the rag catching it cause it to move.