How do you remove top cover? I have removed the screws from the top back two corners.
Answer Hello Dale. If you needing to raise the top cover to access the tub assembly, you will need to release the clips under the front corners of the washer. You can use a flat blade putty knife to do this. If you need to remove it and change it, you will need to remove the control panel. Then unplug all the wires going to the control panel. Next release the clips from the front and raise the cover. Lift the cover and remove anything from under the bottom of the cover that will prevent removal. Once everything is detached from the cover, it will lift off the hinges. Reinstall in reverse order. Hope this helps.