Whirlpool W10253864 Tub-Outer - AppliancePartsPros.com

Total
$0.00

Part Number:	AP4412018
MFG Part Number:	W10253864
Made by:	Whirlpool

Our Price
$205.11
Regularly	You Save
~~$244.08~~	$38.97

Most Interesting

Note: This question is for the older version of this part, but we thought you might still find it helpful

Im confused on looking at this diagram is the outer-tub the thing with the bearing in the middle or is the plastic around the outside? Thank you.

Guest for Model Number ghw9100lw1

Answer Hello! The outer tub W10253864 will have the bearing. Thanks!

1 person found this answer helpful.

Was this helpful?

Does this come with instructions on how remove the tub including the belt removal and replacement

Derek

Answer Hello Derek. No, the instructions do not come with the outer tub assembly.

Was this helpful?

Hello. In the photos it appears to part (Tub-Outer), I can appreciate a grease. This grease sell it separately? or can give me an alternative to this grease, performing the same function of protecting the water from entering the bearing

Ronny

Answer Hello Ronny. Y056016 is the grease used in these units.

Was this helpful?

Latest Questions

I need to replace the outer tub bearings on this washer. I see you offer the whole outer tub which looks like it comes with the bearings, but I don't need to replace the tub...just the bearings. How can I purchase the bearings (and I believe the seal in there as well) without also purchasing the tub? Thanks.

Jman for Model Number WFW9200SQ02

Answer Hello Jman, Unfortunately to replace the bearings on the tub of your unit you will have to replace the outer tub W10253864. The manufacturer does not have a bearing kit for this unit. Because the bearings are pressed in the outer tub would have to be replaced.

Was this helpful?

Note: This question is for the older version of this part, but we thought you might still find it helpful

For the Rear outer tub, 285984, did Whirlpool change the bearing size? I just got a new one and it is bigger than the shaft.

BEEF38 for Model Number GHW9100LQ1

Answer Hello Beef38! The outer tub W10253864 is a manufacturer replacement part and may differ in appearance but is a functional equivalent to the original and will work on your model GHW9100LQ1. Thanks!

Was this helpful?

Note: This question is for the older version of this part, but we thought you might still find it helpful

1 repair tech diagnosed the cause of knock on high speed spin as a bad shock & another said the spider on the inner tub was bad. I don't feel any play on the pulley at the back of the outer tub. The shocks seem a little sloppy but seem all the same. How can I determine the cause of the knock?

Hankr for Model Number WFW8410SW01

Answer Hello Hankr. Pull the unit out and remove the back access panel on the unit. Then, turn the unit on and let it run. Check and see if the noise is coming from the pulley or the shocks. You should be able to determine this being behind the unit with that cover off the unit. Then you can determine if it is the bearings and spider assembly or the shocks.

Was this helpful?

Tub-Outer

Questions & Answers

Appliance Compatibility Tool

Repair Help

Questions & Answers

Most Interesting

Latest Questions

Cross Reference and Model Information