Tub Ring

Mike for Model Number WTW6400SW3

Answer Mike, If the water is dripping from the motor cover / rotor 280146 or bolt it's not the tub cover seal causing the issue. It's most likely going to be a laek from the tub seal tub bearing assembly W10435302 and tool [W10447783] or you could have the option of an outer tub assembly W10193886 You'll also want to dry everything out and repalce the sensor assembly if theres an issue after the seal kit is installed. 

Robert T. for Model Number wtw6600swo

Answer Hello Robert! Yes, the tub ring W10130807 has been remanufactured. However, we do not have the reasons as to why the manufacturer redesigned the part. Thanks! 

Ron

Answer Hello Ron! No, the balance ring only comes equipped with the tub itself, part number W10296143. Thanks! 

Jim S. for Model Number MTW6700TQ0

Answer Hello Jim. Release the clips at the front of the washer and raise the top of the washer. Then you will need to release the clips around the outside of the tub ring. Reinstall with the new tub ring W10130807 in reverse order. Hope this helps. 

Guest

Answer Hi, here is a link to our shipping policy. You will find the current price for shipping here: http://www.appliancepartspros.com/customerservice/shipping.aspx. Thanks!