I see leaking somewhere near gasket, how I change the gasket in the magic chef 20 pound capacity heavy duty washing machine w20hn3c?
Answer Ken, You'll need to be very careful, most of the parts you may need and the special tools you need are no longer available. First you need to unplug the power cord and turn the water faucets off, raise the top of the washer, and remove the front panel. Then you can remove the tub cover and agitator cap, remove the double bolt in the center of the agitator, and lift the agitator off the shaft. Remove the center post, it's a "pressure" fit. Remove the four bolts that hold the gasket and spin tub to the hub assembly, and lift the tub out. You may or may not have a lock nut and clip on the shaft assembly, but if you do, remove the clip and use apunch or chisel and hammer, to remove the nut by tapping it in a counterclockwise direction. Then you can remove the hub assembly using the same method(don't damage these components, they are no longer available). You now have access to the seal assembly and can remove and replace it. Good Luck and Thanks