No water is coming into the ice cube tray. However, water is coming out through the water door dispenser. I replaced the motor module, but still no water and the sensor next to the ice maker that has the on off slider button for the ice maker keeps blinking non stop.
Answer Hello Miriam. Make sure the freezer is between 0° and 5°. You need to check and see if there is power going to the water valve when the icemaker cycles. If so, replace the water valve on the unit. If not, or the icemaker does not cycle, you will need to replace the icemaker on the unit. Also, check and make sure the fill tube on the unit is not frozen and clogged. If so, replace the water valve and thaw out the fill tube. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
How do you install a INLET TUBE?
Unfortunately we do not have the instructions sheet available for the inlet tube but it should come with the new tube.