Can you please tell me step by step how to remove the cabinet and replace this part?
Tony for Model Number 11024982300
Answer Hello Tony,
On the sides of the control panel, using a putty knife, slide the putty knife under to control side to release the clips holding it in place. Once this is done you will then roll the control panel forward and up. There will be 2 clips under to control panel holding the cabinet to the back of unit. Release these clips. There will be a screw holding the valve in place remove screw and take hoses loose from valve. Install new valve and reinstall in reverse.
My washer fills only with hot water and will not fill to rinse. Could this part be the problem. I have already tried a new timer and that wasn't the problem.
Thanks!
Cathy for Model Number 11022992101
Answer Hello Cathy. Yes, if the screens are clear on the cold water, and there is power to the valve, but no cold water, you will need to replace the water valve 8528052. At this time, we do not have a video of the replacement of this part. We are working daily at adding new videos.
Why can I not buy the water inlet valve seperate from the assembly ap3122125 ?
Jim for Model Number gsx9750pwo
Answer Hi Jim. UNfortunately this is the only way the water valve is offered by the manufacturer. Part # 8528052. Thank You.