Valve-Inlt

Tom for Model Number KSFS25FJBTO1

Answer Hello Tom. Yes, if there is power to the valve and no water, you will need to order and replace the water valve. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html 

Mike for Model Number gc5shgxls01

Answer Hello Mike. Yes, if the valve has a slow leak, it can cause the unit to freeze up. 

Jazzy for Model Number gc5shaxvs00

Answer Hello Jazzy. Based on the information you provided, it sounds like the water valve W10247725 is bad and will need to be replaced. 

Dan for Model Number 2199838

Answer Hello Dan. Yes, if there is no power coming to the wires attached to the valve, and the water is dripping, you will need to replace the water valve 2199838 on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html 

Ron for Model Number KSFS25FJBT01

Answer Hello Ron. Yes, if the filter is new, and there is no air in the lines, you will need to replace the water valve 2199838. Hope this helps. 

Mike for Model Number KSFS25FKBT01

Answer Mike, If you haven't yet, check and replace th water filter first 4396508, A clogged filter will reduce the water pressure and flow to the door dispenser. Then move to the water inlet valve 2199838 You most likely have debris built up in the debris screen, slowing the water flow, based on your description. Don't forgrt to flush the water supply line, before you attach it to the new inlet valve, and follow the flushing instructions for the new filter as well. Good Luck and Thanks