Wash water is cold, will not bring in warm water.
Answer Hello Christine. Check and make sure the screen for the hot water is not clogged. If not, and there is power to the hot valve, you will need to order and replace the water valve on the unit.
My washer will wash and spin, when it goes to rinse cycle, nothing happens,, No cold water will go in machine. What is wrong?
Answer Hello Joanie. You need to check and see if there is power to the cold valve and make sure the screens are not clogged. If power is there and the screens are clear, replace the water valve. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
I am trying to find a siphon valve for this model. the washer will run on the hot modes then cut off when it comes to cold mode.
You will want to pull the hose off the cold water side and check to make sure that the water valve is not clogged with dirt or debris. If it is then clean out the obstruction and test the cold water fill. If it still does not fill then replace the water valve.