Dripping water inside of washing machine
Steve C. • Beachwood, NJ • April 05, 2015
Appliance: Maytag Manual, Parts (washer) MAT10PDAAL
My Repair & Advice
Thanks to Appliance Parts Pros® I was able to replace that old water valve drip with a new valve.
Simply unplug power cord, turn off water, disconnect hoses from machine, with front off machine and top unscrewed, tilt top back and unplug wires to old valve remove screws holding valve from back of machine, remove small hose from old valve to top ring and replace if worn. Then just attach wire harness to new valve, screw valve to back using old screws (2), attach hose to top ring, close top of machine and front panel with screws, attach fill hoses making sure H-hot and C-cold in correct position, turn on water and plug it power, test! always test! your work.