Whirlpool 4317943 Whirlpool Icemaker Kit

Whirlpool Icemaker Kit

Total
$0.00

Part Number:	AP2984633
MFG Part Number:	4317943
Made by:	Whirlpool

Part Number:

AP2984633

MFG Part Number:

4317943

Made by:

Whirlpool

Our Price
$96.50
Regularly	You Save
~~$128.93~~	$32.43

In Stock — Ships Today Guaranteed

Quantity

Questions & Answers

251 Questions & Answers

Description

Made by Whirlpool. Fits many brands. This icemaker replaces most Whirlpool, Kitchen Aid and Sears Kenmore (with model prefix 106) brand icemakers. Kit includes wiring harness, mounting hardware and instructions. No longer includes bail arms. Use this kit when replacing an exsisting icemaker. This model does not fit refrigerators that have the ice auger assembly mounted on the door and the electronic sensor to sense ice level.

Made by Whirlpool. Whirlpool brands include Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and others.
Whirlpool also makes various appliance models for Sears / Kenmore.

Appliance Compatibility Tool

Check your model number or use our Cross Reference Tool to find out if this part will work with your appliance.

Where can I find my model number?

Most Interesting

Does ice maker come with water fill valve?

Guest

Answer Hi, this icemaker is just a replacement. The water valve would be included on a add on kit such as 1129316. Thanks!

3 people found this answer helpful.

Was this helpful?

Does this come with the motor and module under the front cover?

Guest

Answer Hi, yes this a complete icemaker assembly. All you have to do to install this unit is, disconnect the old icemaker and install the new one. Thanks!

3 people found this answer helpful.

Was this helpful?

Water is coming out of freezer and running onto floor. Unit just makes 1 or 2 cubes at a time. Can you help?

Ken for Model Number gd2nhgxkq01

Answer Hello Ken. It sounds like you may have two problems here. You will need to check and see if the drain is clogged up in the freezer. If so, you will need to thaw it out and clean it out with hot water and a turkey bastor. As for the low ice production, if you have changed the filter and it is good, then you will need to change the water valve W10408179. Hope this helps.

2 people found this answer helpful.

Was this helpful?

Latest Questions

How can you tell if your ice maker is getting water to enable it to make ice cubes?

George

Answer Hello George. You cycle the icemaker on the unit. Here is a link to our Repair Forum, this is a free service to our customers. Use this link to access the repair for your question. http://forum.appliancepartspros.com/refrigerator-freezer-repair/181857-amana-icemaker.html

Was this helpful?

I just bought this ice maker did not realize it did not come with a bail, I see it on the parts list but can't find a part number please help! Thanks

Scott S.

Answer Hello Scott. 627792 is one arm and 2304354 is used on a side by side.

Was this helpful?

Water enters the tray then runs into the bin. Then onto the floor. I noticed it when the auger would not turn due to ice buildup in the bim. After cleaning out the bin water just runs out. Was working normally yesterday.

Jim H for Model Number Whirlpool refrierator - GD25DFXFW

Answer Jim, It's more likely you will need a fill valve W10408179 on the back of the refrigerator. As long as the ejector rake is in the 1 to 2 o'clock position, the ice maker is "OFF" until the thermostat closes and the ice maker advances through a harvest cycle. It's possible but not likely that you may have a "stuck" fill contact, in the ice maker control module.

Was this helpful?

Whirlpool Icemaker Kit

Questions & Answers

Description

Appliance Compatibility Tool

Repair Help

Repair Video

How to Replace Whirlpool Icemaker Kit #4317943

Comment on this video

Questions & Answers

Most Interesting

Latest Questions

Cross Reference and Model Information