How to replace the triple element on an electric Samsung range

If you’re struggling with uneven heating, inconsistent temperatures, or a triple element that’s not heating in your electric Samsung range, then the element probably needs to be replaced. Tackling appliance repairs like this one may seem daunting, but we’re here to help you save time and money!

If you need any replacement parts for your appliance, you can enter your model number at AppliancePartsPros.com to order them. Most orders arrive in just two business days, and we have thousands of free guides to show you how to install your new parts.

Important: The part replacement information provided in this article is based on model FTQ387LWGX and may not apply to your specific appliance model. While we strive to offer helpful advice for DIY appliance repairs, variations in models and configurations can lead to differences in troubleshooting steps, error codes and part replacements. For the most accurate guidance, we strongly recommend consulting the technical sheet for your specific appliance model.

What you need

• Replacement triple element (make sure it’s compatible with your specific range model before installing)
• Phillips head screwdriver
• Flathead screwdriver

Important: The specific tools required may vary depending on the model of your appliance and the type of fasteners used on it. Always consult the user manual or refer to any specific instructions provided by the manufacturer for the recommended tools for your appliance model.

Read more:  Electric Range Heating Coil Cleaning & Upkeep

Safety precautions

When working on any appliance, remember to keep safety first. Here are some tips to keep in mind:

• Always power off and unplug your appliance or switch off the circuit breaker before you attempt any maintenance or replacement work. This keeps you safe by eliminating any risk of electric shock.
• If the appliance has recently been used, give it plenty of time to cool down before working on it.
• Take your time while working to prevent accidents and personal injuries. Rushing is the enemy of precision.
• Work in a well-lit area so you can see and access appliance parts.
• Keep your workspace free of clutter and other obstacles. Keep children and pets away from the work area.
• Never work on internal parts with wet hands. Make sure the work area is completely dry.
• Check the user manual to see if there are specific installation or safety instructions related to your appliance or replacement part.
• Be gentle when handling or removing parts. Excessive force might damage the appliance or cause personal injury.
• Wear insulated work gloves to protect your hands from sharp metal parts and debris.
• When working with wires, avoid touching any exposed wires or terminals. If you need to touch a wire, use a non-conductive tool or wear insulating gloves to prevent electrical shock.
• Always take photos or make a note of wiring terminals or other connections before disconnecting them to make reassembly easier.

Read more: How to replace a terminal block on an electric range

How to replace the triple element

Follow these steps to change out a faulty triple element in your electric Samsung range.

1. Unplug the range from the power outlet.
2. Access the element by opening the oven door and removing the screws at the top of the opening that holds the main top in place.
3. Disconnect the rear panel and wiring connection in the back.
4. Lift the main top up and flip it over to expose the elements.
5. Remove the bracket that holds the elements in place. There should be 2 screws on each end of the bracket that you need to remove.
6. Before the bracket can be removed, use a Phillips head screwdriver to get under the clip and pop it loose.
7. Once the bracket is removed, disconnect the wiring and take out the old, faulty element.
8. Place the new element back on the glass surface.
9. Reinstall the wiring for the new element.
10. Place the bracket back onto the elements and install the screws to secure it.
11. Flip the glass top back over and install the screws under the cooktop to secure it in place.
12. Install the wiring connection and rear panel at the back of the unit.
13. Plug the range back in or turn the breaker back on.
14. Test the range to make sure the new triple element is working correctly.

Read more: How To Replace A Range/Stove Glass Cooktop Assembly

More information

Thanks for reading! We hope this guide helped you replace the triple element on your electric Samsung range.

If you still need some replacement parts, grab your model number and head over to AppliancePartsPros.com. We offer over two million parts and most orders arrive in two business days. If you need some help with finding the right part or placing an order, you can contact our team at 1 (877) 477-7278.

While you’re waiting for your new part to arrive, you can explore our DIY blog and watch thousands of video tutorials on our YouTube channel.

Follow us on Facebook, Twitter and Instagram to see our latest repair guides!