Check & replace the lint screen in your electric Kenmore dryer: A step-by-step guide

Tired of dealing with a clogged dryer? Learn how to test and replace the lint screen in your electric Kenmore dryer with our simple, step-by-step guide. No need to call a pro!

If you need any replacement parts for your Kenmore dryer, you can enter your model number at AppliancePartsPros.com to order them. Most orders arrive in just two business days, and we have thousands of free guides to show you how to install your new parts.

Important: The troubleshooting information in this article is based on model 11068722700 and may not apply to your specific appliance model. While we strive to offer helpful advice for DIY appliance repairs, variations in models and configurations can lead to differences in troubleshooting steps, error codes and part replacements. For the most accurate guidance, we strongly recommend consulting the technical sheet for your specific appliance model.

What you need

• Soft bristle brush
• Abrasive pad
• Warm water
• Dish soap

Important: The specific tools required may vary depending on the model of your appliance and the type of fasteners used on it. Always consult the user manual or refer to any specific instructions provided by the manufacturer for the recommended tools for your appliance model.

Safety tips

When working on any appliance, remember to keep safety first. Here are some tips to keep in mind:

• Always power off and unplug your appliance or switch off the circuit breaker before you attempt any maintenance or replacement work. This keeps you safe by eliminating any risk of electric shock.
• If the appliance has recently been used, give it plenty of time to cool down before working on it.
• Take your time while working to prevent accidents and personal injuries. Rushing is the enemy of precision.
• Work in a well-lit area so you can see and access appliance parts.
• Keep your workspace free of clutter and other obstacles. Keep children and pets away from the work area.
• Never work on internal parts with wet hands. Make sure the work area is completely dry.
• Check the user manual to see if there are specific installation or safety instructions related to your appliance or replacement part.
• Be gentle when handling or removing parts. Excessive force might damage the appliance or cause personal injury.
• Wear insulated work gloves to protect your hands from sharp metal parts and debris.
• When working with wires, avoid touching any exposed wires or terminals. If you need to touch a wire, use a non-conductive tool or wear insulating gloves to prevent electrical shock.
• Always take photos or make a note of wiring terminals or other connections before disconnecting them to make reassembly easier.
• Consider wearing safety glasses and/or a dust mask when working with chemicals, dust or a large amount of debris to prevent irritation or injury.

Read more: 9 Ways To Improve Your Dryer’s Performance

How to test and replace the lint screen on an electric Kenmore dryer

Step 1: Removal and testing

1. Open the door of your Kenmore electric dryer.
2. Carefully remove the lint screen from its slot.
3. Take the lint screen to a sink to test for airflow by running water over it. If water flows through easily, the screen is clean. If not, proceed to clean it.

Step 2: Cleaning

1. Use a soft bristle brush or an abrasive pad with warm, soapy water to scrub off any residue or debris from the screen gently.
2. Rinse the lint screen thoroughly and allow it to dry completely.

Step 3: Inspection and replacement

1. Inspect the screen for any holes or tears. If you find any damage, replace the lint screen.
2. To replace it, open the dryer door and slide the new screen securely into the slot.

Read more: 9 ways you can maintain your dryer to prevent common problems

More information

Thanks for reading! We hope this guide helped you replace the lint screen in your Kenmore dryer.

If you still need some replacement parts, grab your model number and head over to AppliancePartsPros.com. We have over two million parts in stock and most orders arrive in two business days. If you need some help with finding the right part or placing an order, you can contact our team at 1 (877) 477-7278.

While you’re waiting for your new part to arrive, you can explore our DIY blog and watch thousands of video tutorials on our YouTube channel.

Follow us on Facebook, X and Instagram to see our latest repair guides!