Troubleshooting GE Monogram wall oven error code F0
Steven E / Tuesday April 1, 2025
Is your GE Monogram wall oven displaying error code F0, leaving you unable to cook? Don’t worry; this is a common problem that you can resolve yourself without the need for a costly service call, and we’re here to help!
If you find out that you need any replacement parts for your appliance, you can enter your model number at AppliancePartsPros.com to order them. Most orders arrive in just two business days, and we have thousands of free guides to show you how to install your new parts.
The error code information provided in this article may not apply to your specific appliance model. While we strive to offer helpful advice for DIY appliance repairs, variations in models and configurations can lead to differences in troubleshooting steps, error codes and part replacements. For the most accurate guidance, we strongly recommend consulting the technical sheet for your specific appliance model.
What the error means
The F0 error code on a GE Monogram wall oven indicates that the “OFF” key on the control panel is shorted or has a problem. This can happen for a few reasons:
- The “OFF” key on the control panel may have a physical issue, such as a stuck or worn-out button, causing a short circuit.
- The control board, which processes input from the control panel, may have a fault that is interpreting the “OFF” key input incorrectly, leading to the F0 error.
- A problem with the wiring or ribbon cable connecting the control panel to the control board can also cause the F0 error if it is affecting the “OFF” key signal.
Safety precautions
When working on any appliance, remember to keep safety first. Here are some tips to keep in mind:
- Always power off and unplug your appliance or switch off the circuit breaker before attempting any maintenance or replacement work. This keeps you safe by preventing any risk of injury from electric shock.
- Wear insulated work gloves to protect your hands from sharp metal parts, pinching hazards and debris.
- Take your time and don’t rush while working to prevent accidents and personal injuries.
- Work in a well-lit area so you can clearly see and access the interior parts.
- Clear your workspace of clutter and other obstacles. Keep children and pets away from the work area.
- Never work on internal parts with bare wet hands. Make sure the work area is completely dry.
- Check your user manual to see if there are specific installation or safety instructions for your part or appliance.
- Be gentle when handling or removing parts. Excessive force might damage the appliance or cause injury.
- Wear safety glasses when working with chemicals, dust or cleaning large debris to prevent injury.
- If the appliance has recently been used, give it plenty of time for any heating parts to cool down before working on it.
- Take pictures or make a note of wiring terminals or other connections before disconnecting to prevent any problems with reassembly.
- When working with wires, avoid touching any exposed wires or terminals. If you need to touch a wire, use a non-conductive tool or wear insulating gloves to prevent an electrical shock.
Troubleshooting steps
- Unplug the wall oven from the power source or turn off the circuit breaker to the wall oven.
- Open the oven door.
- Remove the 3 screws across the bottom of the control panel.
- Gently push up on the control panel assembly to release the top catches and access the control board.
- Locate the ribbon cable that connects the control board to the keypad/control panel.
- Check if the cable is loose or damaged.
- Reattach the cable, reassembl,e and test if the error code is resolved if the cable is loose.
- Carefully disconnect the ribbon cable from the control board if it appears normal.
- Use a multimeter to measure the resistance between pins 3 and 4 of the ribbon cable connector on the control board side.
- Press and hold the “OFF” key on the control panel while taking the resistance measurement.
- The resistance reading should be between 125 and 1750 ohms while pressing the “OFF” key.
- If the resistance reading is outside this range, it indicates that the control panel will need to be replaced.
- If the resistance reading is within the expected range, the issue is with the control board.
Additional information
Thank you for reading! We hope this guide helped you get your GE wall oven working again.
If you have any other appliance repair needs or projects, don’t hesitate to explore our other troubleshooting guides and videos.
If you need replacement parts or some extra help with ordering them, grab your model number and head over to AppliancePartsPros.com, where you can chat with a pro, read our DIY blog and more.
Don’t forget to subscribe to us on YouTube and follow us on Facebook, Twitter, and Instagram!
Keep Reading:
With nearly a decade of experience in providing top-notch customer service regarding appliance parts and repair, Steven enjoys sharing practical advice, troubleshooting tips, and interesting information to help readers stay informed.