How to Read Dryer Error Codes (And What They’re Actually Telling You)
AppliancePartsPros Team / Monday November 9, 2026
Error codes aren’t random gibberish; they’re your dryer’s way of telling you exactly what went wrong. Once you understand how to read them, you can skip the guesswork, diagnose the real problem, and fix it yourself instead of waiting days for a service appointment.
Why Understanding Error Codes Matters
Modern dryers have electronic control boards that constantly monitor sensors throughout the machine, thermistors, moisture sensors, door switches, motor relays, and more. When something falls outside the expected range, the control board logs a fault code and displays it so a technician (or in this case, you) can pinpoint the issue fast.
Ignoring error codes doesn’t make them go away. A flashing code often means the dryer won’t run at all, or it’ll run poorly, shutting off early, not heating, or tumbling without drying. The longer you ignore certain faults, like a restricted exhaust or a failing thermistor, the more strain you put on other components. What starts as a cheap sensor replacement can snowball into an expensive control board failure.
Safety First
Before you start any diagnostic work or attempt repairs based on an error code, unplug the dryer from the wall outlet. For gas dryers, also turn off the gas supply valve behind the unit. Even when you’re just reading codes from the display, keep safety in mind. If you need to access internal components later, always disconnect power first. Dryers operate on 240 volts, which is no joke.
Tools and Materials
You don’t need much for the code-reading step itself:
-
Your dryer’s model number (on a label inside the door frame, on the back panel, or behind the kick plate)
-
A phone or notepad to write down the code exactly as it appears
-
Your owner’s manual (if you still have it, many are available as PDFs on the manufacturer’s website)
-
A multimeter (you’ll need this once you start testing the component the code points to)
Step-by-Step: How to Access and Read Error Codes
Step 1: Write Down Exactly What You See
Look at the display panel. Write down the code character by character, including any letters, numbers, and capitalization. “dE” is different from “DE” on some brands. “E1” is not the same as “1E.” Some dryers flash two-part codes, like “F” followed by “E3”, so watch for a few seconds to catch the full sequence.
If the display is cycling through multiple codes, write them all down. The dryer may have logged several faults, and the first one in the sequence is usually the root cause.
Step 2: Understand How Your Brand Formats Codes
Every manufacturer uses a slightly different naming convention, and knowing the pattern helps you decode things faster.
Whirlpool, Maytag, and Kenmore (with Whirlpool-built boards) use an “F” followed by an “E” code. The “F” indicates the function or system, and the “E” indicates the specific error within that system. For example, F1E1 means a main control board fault, while F2E1 points to a user interface issue. These codes display one segment at a time; you’ll see “F1” flash, then “E1” flash, so be patient.
Samsung typically uses short codes like dC, dE, tS, tO, hE, bE, or tE. The lowercase-uppercase pattern is intentional. A “tS” or “tO” code usually flags a temperature sensor issue, while “hE” relates to a heating fault.
LG uses codes like d80, d90, d95, tE1, tE2, or PS. The “d” codes are particularly useful; they tell you the percentage of exhaust restriction, which is something most brands don’t specify. If you’re seeing persistent LG codes, we have a detailed breakdown of LG dryer error codes and what to check for each one.
GE and Hotpoint dryers may display codes like E1, E2, E3, or simply flash indicator lights in a pattern. On models without a digital display, you’ll need to count the number of blinks on an LED. Three blinks, pause, two blinks would be code 32.
Frigidaire and Electrolux use E-codes with numbers, like E31, E32, E4A, or E5B. The E31 and E32 codes on Frigidaire models, for example, both point to thermistor circuit problems; one is an open circuit, the other is a short.
Step 3: Access Stored Codes Through Diagnostic Mode
Sometimes the code disappears from the display after you power-cycle the dryer, but it’s still stored in the control board’s memory. Most dryers have a diagnostic mode that lets you pull up stored fault codes.
For Whirlpool/Maytag dryers, a common entry sequence is: with the dryer off, press any three buttons (except Power) in a specific pattern: press the first, second, third, first, second, third within eight seconds. The display will light up all segments if you’ve entered diagnostic mode. Then press Start to cycle through stored codes.
For Samsung dryers, hold down two buttons simultaneously, often Temp and Time or Dry Level and Time, for three seconds to enter diagnostic mode. The exact combo depends on the model.
For LG dryers, you can often pull codes through the SmartThinQ app or by pressing and holding specific button combinations on the control panel.
The exact button sequence varies by model. If the generic sequence doesn’t work for your dryer, search your specific model number plus “diagnostic mode”: your model number is that important. It’s the skeleton key to every repair.
Step 4: Interpret the Code and Identify the Component
Once you have the code, you need to know what component it’s pointing to. Here’s a general framework that applies across most brands:
Codes referencing temperature (tE, tS, E31, F26, etc.) point to thermistors, thermal fuses, or heating elements. You’ll test these with a multimeter for continuity and resistance values.
Codes referencing the door (dE, dF, F2E4, etc.) indicate the door switch isn’t registering as closed. This could be a faulty switch, a broken latch, or a wiring issue.
Codes referencing the motor (F6E1, bE, E4A, etc.) often mean the motor can’t start or the control board isn’t sensing rotation. Check for jammed blower wheels or a seized drum.
Codes referencing communication (F1, E2, CE, etc.) usually mean the main control board and the user interface board aren’t talking to each other. Check wiring harness connections first; we see loose ribbon cables cause this constantly.
Step 5: Clear the Code and Test
After you’ve identified and repaired the problem, plug the dryer back in and run a cycle. Most codes clear automatically once the fault condition is resolved. If the code persists, re-enter diagnostic mode and look for a “clear codes” option, or unplug the dryer for a full five minutes to reset the control board’s memory.
Common Mistakes to Avoid
Resetting without diagnosing. Unplugging the dryer to clear a code without fixing anything is like putting tape over a check-engine light. The problem is still there, and it’ll come back, usually at a worse time.
Confusing similar codes. “tE” and “dE” look alike when you’re squinting at a flashing display. Double-check what you wrote down. A temperature error requires completely different troubleshooting than a door error.
Replace the control board first. We see this constantly: someone assumes the board is bad because it’s showing a code. The board is reporting a problem with another component. Test the sensor, switch, or element the code actually refers to before you spend $150 on a new board.
Skipping the wiring check. A loose connector or corroded wire causes the same code as a dead component. Always inspect the wiring harness to the affected part before ordering a replacement.
How to Verify You Got It Right
Run a full drying cycle with a normal-sized load. The dryer should heat properly, tumble without stopping, and shut off when the load is dry, with no flashing codes and no unusual behavior. Re-enter diagnostic mode one more time and confirm no stored fault codes remain in memory. If the display stays clean through two or three full cycles, you’ve nailed it.
When you’re ready to replace the part your error code identified, grab your model number and find the exact part for your model. The model number ensures you get the right fit the first time.
Need More Help?
If you’ve pulled a code and aren’t sure what it means for your specific model, or if the code keeps coming back after a repair, post your model number and the exact code over at our community repair forum. You’ll get answers from people who’ve seen your exact situation before.
If you need any replacement parts for your appliances, you can enter your model number at AppliancePartsPros.com to locate and order them quickly. Most orders arrive in just two business days, and we have tons of great information in our repair help section and YouTube videos to help you troubleshoot.
Stay connected with the latest DIY tips, tutorial videos, and repair guides by following us on Facebook, Instagram, and Twitter. We love hearing about your repair stories and successes. If you need more help or want personalized guidance, feel free to contact or call us at 877-477-7278. We’re ready to help you take on your next project with confidence!
Since 1999, AppliancePartsPros.com has helped millions of people repair their broken appliances by providing high-quality original parts at well below retail prices, free support and troubleshooting, and award-winning customer service from an expert, friendly, customer support team!
- Shut off the gas supply before you start.
- Follow your local codes.
- Keep a working carbon monoxide detector nearby.
- A yellow or flickering flame means incomplete combustion — fix it, don’t ignore it.
- If you smell a strong, persistent gas odor: get everyone outside, don’t touch any switches or create a spark, and call your gas utility or 911 from outside.
Written by: AppliancePartsPros Team
The AppliancePartsPros Team is the technicians and parts specialists at AppliancePartsPros. We’ve spent a combined 100+ years working on appliances, and much of what we’ve learned is in our repair videos and these articles. We write to help you figure out what’s actually wrong before you buy anything.






Leave a Reply
Want to join the discussion?Feel free to contribute!