How to replace the ice maker in a Frigidaire fridge

Get ready to be the coolest cat in the kitchen by swapping out that busted Frigidaire ice maker with a chill new one! You might need to change out this part if it failed testing or has been damaged in some way.

Upgrading an ice maker in a Frigidaire fridge is an easy DIY repair that you should be able to complete in under an hour.

If you need replacement parts for your Frigidaire fridge, you can use your model number to find what you need at AppliancePartsPros.com. We also have thousands of free DIY troubleshooting and repair guides to help you fix your fridge yourself.

Are you ready? Let’s unpack how to install a new ice maker!

Disclaimer: The part replacement information provided in this article is based on general service manuals and may not apply to your specific appliance model. While we strive to offer helpful advice for DIY appliance repairs, variations in models and configurations can lead to differences in troubleshooting steps, error codes and part replacements. For the most accurate guidance, we strongly recommend consulting the technical sheet for your specific appliance model.

What you need

• 1/4-inch nut driver
• Replacement ice maker (make sure it’s compatible with your fridge model)

Disclaimer: The specific tools required may vary depending on the model of your appliance and the type of fasteners used on it. Always consult the user manual or refer to any specific instructions provided by the manufacturer for the recommended tools for your appliance model.

Safety precautions

When working on any appliance, remember to keep safety first. Here are some tips to keep in mind:

• Always power off and unplug your appliance or switch off the circuit breaker before you attempt any maintenance or replacement work. This keeps you safe by preventing any risk of electric shock.
• Turn off the water supply at the outlet before beginning repairs. Keep towels ready to catch any residual water in the system when removing parts.
• If the appliance has recently been used, give it plenty of time to cool down before working on it.
• Take your time while working to prevent accidents and personal injuries. Rushing is the enemy of precision.
• Work in a well-lit area so you can clearly see and access appliance parts.
• Keep your workspace free of clutter and other obstacles. Keep children and pets away from the work area.
• Never work on internal parts with wet hands. Make sure the work area is completely dry.
• Check the user manual to see if there are specific installation or safety instructions related to your appliance or replacement part.
• Be gentle when handling or removing parts. Excessive force might damage the appliance or cause personal injury.
• Wear insulated work gloves to protect your hands from sharp metal parts and debris.
• When working with wires, avoid touching any exposed wires or terminals. If you need to touch a wire, use a non-conductive tool or wear insulating gloves to prevent electrical shock.
• Consider wearing safety glasses and/or a dust mask when working with chemicals, dust or a large amount of debris to prevent irritation or injury.

Replacement instructions

Step 1 – Access the ice maker

1. Turn off the fridge and disconnect it from the power supply.
2. Turn off the water supply at the outlet.
3. Open the freezer door.
4. Remove the ice bin from the freezer compartment.
5. Loosen the two 1/4-inch screws that hold the old ice maker in place.
6. Lift the old ice maker off the screws and set it down on the ice bin shelf.
7. Disconnect the wiring harness at the back of the freezer that connects to the ice maker.

Step 2 – Install the new ice maker

1. Connect the wire harness at the back of the unit.
2. Set the new ice maker back onto the screws on the side wall.
3. Tighten the 1/4-inch screws.
4. Check that the fill tube is in the back of the ice maker.
5. Reinstall the ice bin.

More information

Thanks for reading! We hope this guide helped you replace the ice maker in your Frigidaire fridge.

If you still need some replacement parts, grab your model number and head over to AppliancePartsPros.com. We offer over two million parts and most orders arrive in two business days. If you need some help with finding the right part or placing an order, you can contact our team at 1 (877) 477-7278.

While you’re waiting for your new part to arrive, you can explore our DIY blog and watch thousands of video tutorials on our YouTube channel. We can also help you troubleshoot common fridge problems here.

Be sure to follow us on Facebook, Twitter and Instagram to see our latest repair guides!