How to replace a freezer drawer roller assembly in an LG refrigerator

Is your freezer drawer feeling more like a workout than a convenience? Don’t let a faulty roller spoil your meal prep! Discover how to effortlessly replace a worn-out freezer drawer roller with our easy-to-follow guide and don’t miss the step-by-step video tutorial just below.

Need a part?  Search below using your appliance model number to find exactly what you need:

Most of us depend on our fridges every day and tend to take them for granted after a while. But over years of use, all those openings and closings of the freezer drawer can take a toll on that little roller at the bottom, which allows it to move. One day you might find yourself playing a game of tug-of-war just to access your frozen foods!

It’s important to never ignore a sticky drawer. Replacing a worn or damaged roller before it completely fails can prevent further damage to the rails and help you avoid more costly repairs. You can also avoid the hassle of forcefully prying open a stuck freezer.

If you need a new freezer drawer roller assembly, you can find one here. If you need any other replacement parts for your LG refrigerator, just enter your model number at AppliancePartsPros.com to find them. It’s that easy! Most orders arrive in just two business days, and we have thousands of guides to show you how to install your new parts.

WATCH: How to replace a freezer drawer roller

What is the freezer drawer roller & why would it need to be replaced?

The roller assembly allows your freezer drawer to glide in and out of the built-in rails. Over time and with heavy usage, the plastic roller wheel can crack or break down, which can cause too much friction as the drawer is pulled. You’ll typically notice this problem when the drawer sticks or refuses to open or close completely.

What you need

• Small flathead screwdriver
• New Freezer drawer roller assembly (make sure it’s compatible with your specific fridge model BEFORE installing)

READ MORE: 8 DIY Safety Tips

Safety tips

When working on any appliance, remember to keep safety first. Here are some tips to keep in mind:

• Always power off and unplug your appliance or switch off the circuit breaker before you attempt any maintenance or replacement work. This keeps you safe by preventing any risk of electric shock.
• Turn off the water supply at the outlet before beginning repairs. Keep towels ready to catch any residual water in the system when removing parts.
• If the appliance has recently been used, give it plenty of time to cool down before working on it.
• Take your time while working to prevent accidents and personal injuries. Rushing is the enemy of precision.
• Work in a well-lit area so you can see and access appliance parts.
• Keep your workspace free of clutter and other obstacles. Keep children and pets away from the work area.
• Never work on internal parts with wet hands. Make sure the work area is completely dry.
• Check the user manual to see if there are specific installation or safety instructions related to your appliance or replacement part.
• Be gentle when handling or removing parts. Excessive force might damage the appliance or cause personal injury.
• Wear insulated work gloves to protect your hands from sharp metal parts and debris.
• When working with wires, avoid touching any exposed wires or terminals. If you need to touch a wire, use a non-conductive tool or wear insulating gloves to prevent electrical shock.

READ MORE: A Complete Guide to Refrigerator Organization

How to replace the freezer drawer roller assembly

Follow these steps to replace your freezer drawer roller in no time.

Step 1: Remove the ice bucket

1. Unplug the fridge from the outlet.
2. Shut off the water supply to the fridge.
3. Open the freezer drawer.
4. Lift the front lip of the ice bucket and pull the bucket out toward you.
5. Empty the ice bucket and set it aside.

READ MORE: How to prevent appliance fire hazards

Step 2: Remove the bad roller

IMPORTANT: Take care not to bend or damage the rails when removing the old roller.

1. Lift the front end of the drawer and pull it out. Place the drawer on a table or countertop.
2. Lay the freezer drawer upside down and front-facing on a flat, sturdy surface.
3. Wedge the tip of a flathead screwdriver under the roller bracket. Gently pry upwards to pop the defective roller out of place

READ MORE: How To Clean Refrigerator Coils 

Step 3: Install the new roller assembly

1. Line up the replacement roller assembly.
2. Press firmly to snap the bracket into the pre-cut opening.
3. Slide the drawer back into the rails.
4. Slide the drawer back and forth to test the new roller. Make sure it glides smoothly.

READ MORE: Pantry Organization: A Step-by-Step Guide

Step 4: Reinstall the ice bucket

1. Match the curved front of the bucket with the drawer ledge.
2. Lower the ice bucket down until it’s in place. Make sure the bucket is sitting flush and snug, without wobbling.

READ MORE: What Temperature Should A Refrigerator Be Set To?

More information

Thanks for reading! We hope this guide helped you replace the freezer drawer roller in your LG refrigerator.

If you still need some replacement parts, grab your model number and head over to AppliancePartsPros.com. We offer over two million parts and most orders arrive in two business days. If you need some help with finding the right part or placing an order, you can contact our team at 1 (877) 477-7278.

While you’re waiting for your new part to arrive, you can explore our DIY blog and watch thousands of video tutorials on our YouTube channel.

Be sure to follow us on Facebook, Twitter and Instagram to see our latest repair guides!