How to replace LG / Kenmore dryer light bulb 6913EL3001E

Is the dim light inside your LG dryer drum making laundry day a chore? Don’t let a burnt-out bulb keep you in the dark! Discover how easily you can replace it yourself with our step-by-step guide and watch the how-to video just below to light up your laundry routine.

Looking for the right part? Enter your appliance model number below to find the exact match and get your appliance running like new again!

The light bulb inside the drum of your LG dryer may burn out or become defective over time, which can make it difficult to see inside while loading or removing laundry. Fortunately, replacing the light bulb is a quick and easy process that you can complete yourself.

Let’s unpack the replacement steps so you can lighten up your dryer in no time.

If you need a replacement light bulb or other parts for your LG dryer, you can use your model number to find what you’re looking for at AppliancePartsPros.com. We also have thousands of free DIY troubleshooting and repair guides to help you fix your dryer yourself.

Watch here: How to replace LG/Kenmore Light Bulb 6913EL3001E

What you need

• Phillips screwdriver
• Flathead screwdriver
• New light bulb (make sure it’s compatible with your specific dryer model before installing)

Disclaimer: The specific tools required may vary depending on the model of your appliance and the type of fasteners used on it. Always consult the user manual or refer to any specific instructions provided by the manufacturer for the recommended tools for your appliance model.

Read more: Tips for Caring for Your Dryer | Clothes Dryer Maintenance

Check part compatibility

Before you replace the light bulb, make sure you have an OEM part that’s compatible with your specific dryer model. To do this, you’ll need to find the appliance model number.

The model number will say MOD or Model before the numbers and is typically found on a sticker or a metal plate in one of the following locations:

• Inside the dryer door or on the door frame
• On the back of the dryer, near the top or bottom
• On the side of the dryer cabinet
• On the control panel or console

Once you’ve found the model number, write it down or take a clear photo of it for reference.

Next, visit AppliancePartsPros.com, where you can enter your model number to check if the new light bulb is compatible with your model.

Read more: How To Find Your Appliance’s Model Number

Safety precautions

Your safety should always be the top priority when performing any appliance repair.

• Always power off and unplug your appliance or switch off the circuit breaker before you attempt any maintenance or replacement work. This keeps you safe by eliminating any risk of electric shock.
• If the appliance has recently been used, give it plenty of time to cool down before working on it.
• If you have a gas model, shut off the gas supply to prevent any leaks while you work.
• Take your time while working to prevent accidents and personal injuries. Rushing is the enemy of precision.
• Work in a well-lit area so you can see and access appliance parts.
• Keep your workspace free of clutter and other obstacles. Keep children and pets away from the work area.
• Never work on internal parts with wet hands. Make sure the work area is completely dry.
• Check the user manual to see if there are specific installation or safety instructions related to your appliance or replacement part.
• Be gentle when handling or removing parts. Excessive force might damage the appliance or cause personal injury.
• Wear insulated work gloves to protect your hands from sharp metal parts and debris.
• When working with wires, avoid touching any exposed wires or terminals. If you need to touch a wire, use a non-conductive tool or wear insulating gloves to prevent electrical shock.
• Always take photos or make a note of wiring terminals or other connections before disconnecting them to make reassembly easier.

How to replace the light bulb

Ready to replace? Follow these steps to improve the visibility in your dryer.

1. Unplug the dryer from the power outlet.
2. Open the dryer door to access the inside of the drum.
3. Find the light bulb, which is usually at the ten o’clock position inside the drum.
4. Use a Philips screwdriver to carefully remove the screw that holds the lens.
5. Position a flathead screwdriver at the bottom of the lens, then gently apply pressure upward to release the lens from its position.
6. Use the screwdriver to pull the lens out of the dryer by lifting it slightly.
7. Set the lens aside in a safe location.
8. Unscrew the light bulb by turning it counterclockwise until it comes loose.
9. Remove the old light bulb from the socket.
10. Insert the new light bulb into the socket and turn it clockwise to screw it in. Avoid overtightening it to prevent damage.
11. Insert the bottom of the lens first. Once the bottom is positioned, lift the lens and align it correctly.
12. Use the Philips screwdriver to insert the screw and tighten it to secure the lens in place.
13. Double-check that the lens is secure and aligned.
14. Close the dryer door.
15. Plug the dryer back into the power outlet. If you have a gas model, turn on the gas supply.
16. Check that the new light bulb is working correctly by opening the dryer door.

Read more: Gas Dryers vs Electric Dryers: Which is Better For You?

Additional information

Thanks for reading! We hope this guide helped you replace the light bulb in your LG dryer.

If you still need some replacement parts, grab your model number and head over to AppliancePartsPros.com. We offer over two million parts and most orders arrive in two business days. If you need some help with finding the right part or placing an order, you can contact our team at 1 (877) 477-7278.

While you’re waiting for your new part to arrive, you can explore our DIY blog and watch thousands of video tutorials on our YouTube channel.

Follow us on Facebook, Twitter and Instagram to see our latest repair guides!