How to replace water filter cover 240434401 on a Frigidaire refrigerator

Is your Frigidaire refrigerator’s water filter cover cracked or damaged? Don’t worry—replacing it is easier than you think and can help maintain your appliance’s efficiency and your family’s health by keeping contaminants at bay. Scroll down to watch our step-by-step how-to video and see how simple it is to tackle this DIY fix without calling in a professional!

Looking for the right part? Enter your appliance model number below to find the exact match and get your appliance running like new again!

The water filter cover protects the water filter cartridge in your Frigidaire refrigerator. It creates a tight seal and prevents contaminants from entering the water supply. Over time, the cover may become worn out, cracked, or damaged due to regular usage or an accident.

The good news: you can replace the water filter cover without any professional assistance to save yourself time and money.

Let’s get started so you can learn how to replace the water filter cover on your Frigidaire refrigerator!

You can find a replacement water filter cover here. If you need other replacement parts for your Frigidaire refrigerator, just enter your model number at AppliancePartsPros.com to find them. It’s that easy! Most orders arrive in just two business days, and we have thousands of guides to show you how to install your new parts.

Watch the repair here

What you need

• Flathead screwdriver
• Flashlight
• Cleaning supplies
• Towels
• Insulated work gloves
• New water filter cover (make sure it’s compatible with your specific fridge model before installing)

Disclaimer: The specific tools required may vary depending on the model of your appliance and the type of fasteners used on it. Always consult the user manual or refer to any specific instructions provided by the manufacturer for the recommended tools for your appliance model.

Read more: Tool Maintenance 101: The Basics You Need To Know

Safety tips

When working on any appliance, remember to keep safety first. Here are some tips to keep in mind:

• Always power off and unplug your appliance or switch off the circuit breaker before you attempt any maintenance or replacement work. This keeps you safe by eliminating any risk of electric shock.
• If the appliance has recently been used, give it plenty of time to cool down before working on it.
• Turn off the water supply at the outlet before beginning repairs. Keep towels ready to catch any residual water in the system when removing parts.
• Take your time while working to prevent accidents and personal injuries. Rushing is the enemy of precision.
• Work in a well-lit area so you can see and access appliance parts.
• Keep your workspace free of clutter and other obstacles. Keep children and pets away from the work area.
• Never work on internal parts with wet hands. Make sure the work area is completely dry.
• Check the user manual to see if there are specific installation or safety instructions related to your appliance or replacement part.
• Be gentle when handling or removing parts. Excessive force might damage the appliance or cause personal injury.
• Wear insulated work gloves to protect your hands from sharp metal parts and debris.
• When working with wires, avoid touching any exposed wires or terminals. If you need to touch a wire, use a non-conductive tool or wear insulating gloves to prevent electrical shock.
• Always take photos or make a note of wiring terminals or other connections before disconnecting them to make reassembly easier.

Read more: How to clean and maintain your refrigerator’s water dispenser

How to replace the water filter cover

Ready to replace the water filter cover? Work through these steps so you can get your Frigidaire refrigerator back up and running.

1. Unplug the refrigerator from the power outlet and disconnect it from the water supply.
2. Open the fresh food door of the refrigerator to access the water filter and the water filter cover.
3. Place a towel underneath the water filter cover to catch any water that may drip down during the replacement process.
4. Unscrew the water filter cover by turning it counterclockwise. Be cautious as there may be some water inside the cover.
5. Empty out any water that may be inside the cover.
6. Find the O-ring inside the cover. The ring needs to be removed and transferred to the new water filter cover. If possible, order a new O-ring and replace it along with the new cover. But if the existing O-ring is in good condition, it can be reused.
7. Use a flathead screwdriver to gently pry out the O-ring from the old cover.
8. Make sure it’s positioned correctly, then install the O-ring into the new water filter cover by placing it in the designated groove.
9. Take the new filter cover and align it with the opening in the refrigerator.
10. Turn the cover clockwise to screw it back into place. Make sure the cover is tightened but avoid overtightening it.
11. Remove the towel from underneath the cover.
12. Close the fresh food door.
13. Plug the refrigerator back in and turn the water supply back on.
14. Monitor the refrigerator for several hours to make sure it’s working correctly.

Read more: Why Is There Water Pooling in My Refrigerator?

Additional information

Thanks for reading! We hope this article helped you replace the water filter cover on your Frigidaire refrigerator.

If you still need some replacement parts, grab your model number and head over to AppliancePartsPros.com. We offer over two million parts and most orders arrive in two business days. If you need some help with finding the right part or placing an order, you can contact our team at 1 (877) 477-7278.

While you’re waiting for your new part to arrive, you can explore our DIY blog and watch thousands of video tutorials on our YouTube channel.

Follow us on Facebook, Twitter and Instagram to see our latest repair guides!