How to replace a Samsung electric range door handle like a pro

Tired of paying high repair costs to replace your Samsung electric range door handle? Learn how to do the job yourself with this simple guide for doing it like a pro.

If you need any replacement parts for your Samsung electric range, you can enter your model number at AppliancePartsPros.com to order them. Most orders arrive in just two business days, and we have thousands of free guides to show you how to install your new parts.

Important: The part replacement information in this article is based on the model FTQ387LWGX and may not apply to your specific appliance model. While we strive to offer helpful advice for DIY appliance repairs, variations in models and configurations can lead to differences in troubleshooting steps, error codes and part replacements. For the most accurate guidance, we strongly recommend consulting the technical sheet for your specific appliance model.

What you need

• Phillips head screwdriver

Important: The specific tools required may vary depending on the model of your appliance and the type of fasteners used on it. Always consult the user manual or refer to any specific instructions provided by the manufacturer for the recommended tools for your appliance model.

Safety tips

When working on any appliance, remember to keep safety first. Here are some tips to keep in mind:

• Always power off and unplug your appliance or switch off the circuit breaker before you attempt any maintenance or replacement work. This keeps you safe by eliminating any risk of electric shock. 
• If the appliance has recently been used, give it plenty of time to cool down before working on it. 
• Take your time while working to prevent accidents and personal injuries. Rushing is the enemy of precision.
• Work in a well-lit area so you can see and access appliance parts.
• Keep your workspace free of clutter and other obstacles. Keep children and pets away from the work area.
• Never work on internal parts with wet hands. Make sure the work area is completely dry.
• Check the user manual to see if there are specific installation or safety instructions related to your appliance or replacement part. 
• Be gentle when handling or removing parts. Excessive force might damage the appliance or cause personal injury.
• Wear insulated work gloves to protect your hands from sharp metal parts and debris.
• When working with wires, avoid touching any exposed wires or terminals. If you need to touch a wire, use a non-conductive tool or wear insulating gloves to prevent electrical shock.
• Always take photos or make a note of wiring terminals or other connections before disconnecting them to make reassembly easier.
• Consider wearing safety glasses and/or a dust mask when working with chemicals, dust or a large amount of debris to prevent irritation or injury.

Read more: 6 safety tips for using an electric range

How to replace Samsung electric range door handle

To replace a faulty or damaged door handle on your Samsung electric range, follow these steps:

Step 1: Remove the door

1. Open the oven door fully and engage the swivel on the hinge to lock the door in place.
2. Lift the door back until it stops, then grab both sides and carefully lift the door off the range.
3. Place the door, front panel down, on a soft towel or blanket to protect it.

Step 2: Remove the old handle

1. Locate the two Phillips head screws at the top of the inner door panel and remove them.
2. Find three more Phillips head screws along the bottom ridge of the door and remove them.
3. Lift off the door liner to expose the screws holding the handle.
4. Remove the two screws near the handle area to detach the old door handle.

Step 3: Install the new handle

1. Position the new handle on the door and insert the screws from the back side to secure it.
2. Place the door liner back onto the door front and insert the screws to hold it in place, being careful not to overtighten.

Step 4: Reattach the door and finish

1. Reattach the door to the range by aligning the hinges and securing it in place.
2. Plug the range back in or turn the breaker back on.

Read more: Pro tips for testing & replacing a dual infinite switch on an electric Samsung range

Additional information

Thanks for reading! We hope this guide helped you replace the door handle in your Samsung electric range. 

If you still need some replacement parts, grab your model number and head over to AppliancePartsPros.com. We have over two million parts in stock and most orders arrive in two business days. If you need some help with finding the right part or placing an order, you can contact our team at 1 (877) 477-7278.

While you’re waiting for your new part to arrive, you can explore our DIY blog and watch thousands of video tutorials on our YouTube channel.

Follow us on Facebook, Twitter and Instagram to see our latest repair guides!