How to replace the warming element on an electric Samsung range

The warming element on an electric Samsung range generates heat so the unit can keep food warm. Over time, regular use can cause the warming element to wear out or become damaged.

You might need to replace the warming element if the element no longer heats up, the range doesn’t maintain the set temperature or the element trips the circuit breaker. Fortunately, with a few basic tools and some patience, you can tackle this repair yourself and get your range back in working order.

If you need any replacement parts for your Samsung range, you can enter your model number at AppliancePartsPros.com to order them. Most orders arrive in just two business days, and we have thousands of free guides to show you how to install your new parts.

Important: The part replacement information provided in this article is based on model FTQ387LWGX and may not apply to your specific appliance model. While we strive to offer helpful advice for DIY appliance repairs, variations in models and configurations can lead to differences in troubleshooting steps, error codes and part replacements. For the most accurate guidance, we strongly recommend consulting the technical sheet for your specific appliance model.

What you need

• Replacement warming element (make sure it’s compatible with your specific range model before installing)
• Phillips head screwdriver

Important: The specific tools required may vary depending on the model of your appliance and the type of fasteners used on it. Always consult the user manual or refer to any specific instructions provided by the manufacturer for the recommended tools for your appliance model.

Read more:  How to fix a slow preheating electric range with a hidden bake element

Safety precautions

When working on any appliance, remember to keep safety first. Here are some tips to keep in mind:

• Always power off and unplug your appliance or switch off the circuit breaker before you attempt any maintenance or replacement work. This keeps you safe by eliminating any risk of electric shock.
• If the appliance has recently been used, give it plenty of time to cool down before working on it.
• Take your time while working to prevent accidents and personal injuries. Rushing is the enemy of precision.
• Work in a well-lit area so you can see and access appliance parts.
• Keep your workspace free of clutter and other obstacles. Keep children and pets away from the work area.
• Never work on internal parts with wet hands. Make sure the work area is completely dry.
• Check the user manual to see if there are specific installation or safety instructions related to your appliance or replacement part.
• Be gentle when handling or removing parts. Excessive force might damage the appliance or cause personal injury.
• Wear insulated work gloves to protect your hands from sharp metal parts and debris.
• When working with wires, avoid touching any exposed wires or terminals. If you need to touch a wire, use a non-conductive tool or wear insulating gloves to prevent electrical shock.
• Always take photos or make a note of wiring terminals or other connections before disconnecting them to make reassembly easier.

Read more: Electric Range Element Won’t Heat: Top 7 Reasons & Fixes

How to replace the warming element

Follow these steps to change out a faulty warming element on an electric Samsung range.

1. Unplug the electric range from the power supply.
2. Open the oven door and remove the Phillips head screws at the top of the oven opening.
3. Carefully flip the main top of the range over to access the warming element underneath.
4. Take a photo of the wiring connections to the warming element so you can properly reconnect the new element later on.
5. Find the bracket that holds the warming element in place and remove the 2 screws that hold it.
6. Disconnect the wiring from the warming element and lift the old element out.
7. Connect the wires to the terminals on the new element by matching the wiring configuration in the photo you took earlier.
8. Place the new element onto the bracket and secure the bracket back into the range with the 2 screws.
9. Flip the main top of the range back over and align it in place.
10. Reinstall the Phillips head screws at the top of the oven opening to secure the main top.
11. Plug the electric range back in.
12. Test the range to make sure the new warming element is working correctly.

Read more: Electric Range Heating Coil Cleaning & Upkeep

More information

Thanks for reading! We hope this guide helped you replace the warming element on your electric Samsung range.

If you still need some replacement parts, grab your model number and head over to AppliancePartsPros.com. We offer over two million parts and most orders arrive in two business days. If you need some help with finding the right part or placing an order, you can contact our team at 1 (877) 477-7278.

While you’re waiting for your new part to arrive, you can explore our DIY blog and watch thousands of video tutorials on our YouTube channel.

Follow us on Facebook, Twitter and Instagram to see our latest repair guides!