What Does Error Code 1E (LE) Mean On A Samsung Washer?

---

Steven E / Thursday May 25, 2023

Dealing with error codes on your Samsung washer can be a daunting task, especially when you’re unsure of what they mean. Among these cryptic codes, Error Code 1E (LE) is one that is fairly common in terms of Samsung washers. This error code may appear as LE, 1E, and as an IE error code. All of these represent the same code.

But worry not! This blog post will guide you through understanding this common yet perplexing error and provide actionable steps to troubleshoot and prevent it from occurring in the future.

Understanding Error Code 1E (LE) On A Samsung Washer

When your Samsung washer displays error code 1E (LE), it indicates a problem with the water level sensor, which is responsible for regulating the amount of water in the machine during wash cycles. In other cases, it can indicate that there is some sort of leakage error as well.

Definition And Causes

Error code 1E (LE) on a Samsung washer refers to an issue with the water level in the appliance during its washing cycle. This occurs in both Samsung front-load washers and top-load washers. This error typically occurs when the machine is unable to fill up with enough water, failing to reach the proper water level within a specific timeframe.

For instance, if your washing machine is connected to hot and cold water taps but has mistakenly been set up for a cold wash only, there may be an imbalance in temperature readings causing the LE error code to appear.

Additionally, if there has been too much detergent used in combination with soft water conditions, excess suds might form inside the washer leading to overflow and leakage errors resulting from incomplete draining cycles.

Symptoms Of The Error Code

Some common symptoms of the Error Code 1E (LE) on a Samsung washer include:

• The washer fails to fill with water or takes an unusually long time to do so.
• The water level in the washing machine is noticeably low or inconsistent during a cycle.
• The display shows the 1E or LE error code, prompting users to take action.
• The washing machine stops mid-cycle and is unable to complete its washing process.
• Unusual noises, such as banging or clicking, may be heard while the washer operates.
• The washer door may remain locked, preventing users from opening it after an interrupted cycle.
• Users may notice water leaks around the appliance or near the drain hose

By identifying these symptoms early on, you can take appropriate measures to troubleshoot and fix the problem before it worsens or causes further damage to the appliance.

Troubleshooting Error Code 1E (LE) On A Samsung Washer

To troubleshoot error code 1E (LE) on a Samsung washer, try resetting the machine, inspecting the water inlet valve and checking the water level sensor, examining the drain pump, inspecting and cleaning filters, as well as examining the pressure sensor.

Resetting The Washer

To troubleshoot the 1E (LE) error code on a Samsung washer, resetting the machine is often a good first step. Here are the steps to reset your Samsung washer:

1. Turn off the power supply to the washing machine by unplugging it from the wall.
2. Wait for at least 30 seconds before plugging it back in.
3. Turn on the power supply to the washing machine.
4. Press and hold both the “Delay End” and “Start/Pause” buttons simultaneously for three seconds.
5. Release both buttons after three seconds.

This should reset your Samsung washing machine and clear any error codes from the control board that may have occurred. If this doesn’t work, further inspection of other parts of the machine as outlined in our above troubleshooting guide may be required.

Inspecting The Water Inlet Valve

To troubleshoot the 1E error on a Samsung washer, it’s important to inspect the water inlet valve for blockages or a water supply error. Here are the steps to follow:

1. Turn off the power and water supply to the washer before beginning any inspection.
2. Locate the water inlet valve at the back of the washer and remove its connections.
3. Inspect the valve for signs of damage or wear, such as cracks or corrosion.
4. Check that there is no debris blocking or clogging the valve’s screens or filters.
5. Test the valve by using a multimeter to check if it is working correctly.
6. If necessary, replace a faulty water inlet valve with a new one that is compatible with your Samsung washer model by clicking here. Be sure to find the compatible part using your appliance’s model number to search.

Remember to always follow manufacturer instructions when replacing any component in your Samsung washer system.

Checking The Water Level Sensor

The next step to troubleshoot a 1E (LE) error code on your Samsung washer is to check the water level sensor. Here are the steps you can follow:

1. Disconnect the washer from its power source and turn off the water supply valves.
2. Remove the top panel of the washer by unscrewing any bolts or screws holding it in place.
3. Locate the water level sensor, which is usually located near the rear of the washer drum or under the control panel.
4. Inspect the water level sensor wiring for any signs of damage like frayed wires or loose connections.
5. Clean any debris or buildup around the water level sensor with a soft brush or cloth.
6. Test the water level sensor using a multimeter to determine if it’s functioning properly.

If you find any issues during this process, like a faulty water level sensor, replace it with a new one to resolve the error code. Remember to reconnect all wires and fittings once you complete troubleshooting and testing.

Regular maintenance, proper installation, and following the manufacturer’s instructions can help prevent future occurrences of this error code on your Samsung washer as well.

Examining The Drain Pump

The drain pump is an essential component in a Samsung washer as it helps to drain the water from the tub during the wash cycle. If there is a problem with this pump, it can lead to error code 1E (LE) on your machine. Here are some steps to examine the drain pump:

1. Unplug the washing machine and ensure that it is not connected to any power source before you begin.
2. Locate the drain pump at the bottom of your washer.
3. Check if there are any visible signs of blockage, such as small objects or debris caught inside the pump’s impeller blades.
4. Inspect the wiring connecting the drain pump to other components in your washer for fraying or damage.
5. Test the continuity of your drain pump using a multimeter to ensure that it is working correctly.
6. If you notice any signs of wear or tear, it may be necessary to replace your drain pump.

By examining and following these steps, you can troubleshoot and fix issues related to error code 1E (LE) originating from a malfunctioning drain pump on your Samsung washer.

Inspecting And Cleaning Filters

Inspecting and cleaning filters is an important step in troubleshooting error code 1E (LE) on a Samsung washer. This can help to ensure that water is flowing properly through the system and reaching the appropriate level during the fill cycle. Here are the steps to inspect and clean filters:

1. Locate the filter(s) associated with your Samsung washer.
2. Remove the filter(s) from their housing.
3. Inspect them for any debris or blockages, such as lint or dirt buildup.
4. If there are visible obstructions, rinse the filter(s) under running water until they are clean.
5. If necessary, use a soft-bristled brush to gently scrub any stubborn debris away.
6. Once cleaned, reinsert the filter(s) back into their housing and ensure that they are secured properly.

Regularly inspecting and cleaning filters can help prevent future occurrences of error code 1E (LE) on your Samsung washer, as well as other potential issues caused by blocked or clogged filters.

Examining The Pressure Sensor

To troubleshoot error code 1E (LE) on a Samsung washer, examining the pressure sensor is an important step. Here are the steps to follow:

1. Turn off the power supply and unplug the machine.
2. Locate the pressure sensor, which is usually found at the bottom of the drum.
3. Remove any obstacles or debris around the sensor.
4. Check for any signs of damage, such as cracks or chips in the sensor surface.
5. Inspect the wiring connections going into and out of the pressure sensor to ensure they are secure and not loose or corroded.
6. Use a multimeter to test if there is continuity between each of the three wires coming out of the sensor. If there is no continuity, this indicates a faulty pressure switch.

If you find that the pressure sensor is faulty or damaged, it will need to be replaced. Checking and maintaining your washing machine regularly can help prevent issues like these from occurring in future wash cycles.

Prevention Tips To Avoid Future Occurrence Of 1E (LE) Error Code

To prevent future occurrences of the 1E (LE) error code on your Samsung washer, make sure to follow these tips and ensure that your washing machine is always working efficiently.

Regular Maintenance And Cleaning Of The Washer

Regular maintenance and cleaning of the washer are crucial to avoid the occurrence of error code 1E (LE) and other errors on Samsung washers. Here are some tips on how to maintain and clean your washer:

1. Clean the detergent drawer: Remove the detergent drawer and clean it with warm water and a mild soap solution regularly.
2. Wipe down the interior drum: After every wash cycle, wipe down the interior drum with a clean, damp cloth.
3. Check for leaks: Regularly check for any water leaks near the water supply lines and hoses.
4. Clean filters: Inspect and clean both inlet and outlet filters at least once a month or as often as necessary.
5. Avoid overloading: Do not overload the washer beyond its capacity as this can cause strain on the machine’s components leading to breakdowns.

By following these maintenance tips, you can avoid costly repairs caused by buildup or wear and tear.

Conclusion

Dealing with error codes on your Samsung washer, such as the elusive Error Code 1E (LE), can be a daunting task, but you now have the knowledge and tools to troubleshoot and prevent this issue from recurring thanks to AppliancePartsPros.com. In conclusion, the 1E (IE) code on a Samsung washer indicates a water level sensor failure. This can be caused by various factors such as faulty water inlet valves, clogged filters, or water leaks.

Troubleshooting this error involves resetting the washer and checking the different parts that could be causing the issue. It’s essential to maintain and clean your washer regularly to avoid future errors. As you embark on the path to conquer Error Code 1E (LE), remember that AppliancePartsPros.com is your trusted source for high-quality washer parts. With over 2 million parts in stock, we have everything you need to restore your washer to optimal performance. Visit AppliancePartsPros.com today and experience the convenience and expertise that will make your appliance repair a breeze.