Parts for Ge XUF21DMRAWW: Cabinet & Shelves Parts

This upper shelf assembly replaces a damaged or missing shelf in the refrigerator compartment to restore stable storage for food and containers. It provides a reliable, level surface and helps organize interior storage. What it does:

• Replaces worn, cracked, or missing upper refrigerator shelf
• Restores a flat, stable surface for storing leftovers, containers, and groceries
• Helps maintain organized interior shelving and proper airflow spacing
• Fits into existing shelf supports or rails for secure placement

• One upper shelf assembly

• Remove food and loose items before installing; support adjacent shelves while you work
• Slide or snap the shelf into the existing shelf supports per the refrigerator's shelf rail design
• No special tools typically required; handle glass shelves carefully to avoid breakage
• Replace shelf support clips or rails if damaged before installing the shelf

This full-width glass shelf assembly replaces a cracked, broken or missing refrigerator shelf and restores usable flat storage space. Tempered glass with a finished edge gives a clean look and supports food storage while helping contain spills. What it does:

• Provides a sturdy, level surface for storing food and containers
• Contains minor spills and makes cleanup easier compared with open wire shelving
• Replaces damaged or missing glass shelves that can no longer support items safely
• Fits into existing shelf track supports to restore original shelf layout

• Remove all items from the shelf area before installation
• Slide into the existing shelf tracks or support brackets until fully seated; do not force
• Handle glass carefully and wear gloves to avoid injury
• Clean with mild detergent and non-abrasive cloth; avoid harsh chemicals that may damage finish

This is a half-width glass shelf assembly designed to replace a damaged or worn fridge shelf. It provides a stable, easy-to-clean surface and restores proper storage layout in the refrigerator interior. What it does:

• Replaces a broken, cracked, or chipped half-width glass shelf
• Restores level support for food containers and prevents spills from falling through
• Helps maintain interior organization when original shelving is missing or damaged
• Fits into existing shelf tracks or support brackets to secure glass safely

• One half-width glass shelf assembly

• Follow manufacturer instructions for safe installation; remove all food before beginning
• Handle glass carefully—wear cut-resistant gloves and eye protection
• Check shelf supports or rails for damage before seating the new shelf

The Shelf Assembly Lower is an OEM part for GE refrigerators. It provides an adjustable storage shelf surface within the fresh food compartment. The shelf is able to hold various items and be positioned at different heights for the organization. 

Symptoms of a bad lower shelf include:

• Sagging, warping, or inability to bear weight  
• Loose mounting brackets that cause slipping
• Cracks or breaks in the shelf material
• Hardware or mounting components that are damaged or missing

Causes can be normal wear over long-term use, exposure to excessive weight, or damage from impact.

This GE OEM replacement restores storage versatility with adjustable shelf positioning. It ensures a sturdy, reliable surface for groceries and other fridge items. Compatible with later produced Hotpoint, RCA, and select Kenmore refrigerator models as well.

This top hinge cover protects and conceals the refrigerator door hinge for a cleaner look and smoother operation. It replaces damaged or missing covers to help prevent snags and keep the hinge area looking finished. What it does:

• Covers and protects the top door hinge assembly from dirt, dust, and accidental contact
• Restores a finished, factory appearance when the original cover is cracked or broken
• Helps reduce the chance of clothing or items catching on the exposed hinge
• Fits over the top hinge; designed to align with the hinge mounting area

• One top hinge cover

• Back up and support the door before removing or installing the hinge cover to avoid injury or door damage
• Use basic hand tools to remove the hinge fasteners as required; retain screws for reassembly
• Inspect hinge and fasteners for wear or damage while the cover is removed

This genuine replacement screw secures components and trim on compatible appliances, restoring proper fit and preventing loose parts. Use it to replace a lost or stripped fastener and keep panels and assemblies stable. What it does:

• Fastens trim, panels, brackets or internal components to the appliance chassis
• Restores secure attachment where a damaged or missing screw causes rattling or loose parts
• Helps maintain proper alignment of doors, panels or control assemblies
• Small, corrosion-resistant design for reliable long-term fastening

• Use the matching driver bit to avoid stripping the head; hand-start threads before using a driver
• Do not overtighten—stop when the part is snug and secure to avoid cracking panels or stripping threads
• Disconnect power and follow appliance-specific safety steps before accessing internal components
• If original hardware shows corrosion or thread damage, replace with the correct OEM fastener only

This hinge top and pin assembly secures and supports a refrigerator door at the top, providing a stable pivot for smooth opening and closing. Replaces a worn or damaged top hinge to restore proper door alignment and operation. What it does

• Provides the pivot point that lets the door swing open and closed
• Holds the top of the door securely to maintain correct alignment
• Helps prevent door sagging or uneven gaps that can affect sealing
• Reduces hinge noise caused by worn or bent components

• Disconnect power to the appliance and remove items from the door before starting.
• Support the door while removing and installing the hinge to prevent dropping or damage.
• Use basic hand tools; follow the OEM instructions for torque and alignment if available.

This is a single mounting screw used to secure components and panels on compatible GE appliances. It provides a reliable fastener for replacing lost or damaged screws to restore proper fit and reduce rattling or loose parts. What it does:

• Secures panels, brackets, or small components to the appliance frame
• Restores proper panel fit and alignment to reduce vibration and noise
• Helps maintain grounding and stable connections where a screw fastens an electrical or chassis part
• Replaces missing or stripped screws that prevent panels or assemblies from seating correctly

• Unplug the appliance or shut off power at the circuit breaker before starting
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; avoid overtightening which can strip threads or crack components
• Replace with the exact part number for best fit and function

This wheel adjust foot replaces a worn or damaged leveling glide to restore stable, even support and easy adjustment for the appliance. It helps keep the appliance level and prevents rocking or uneven wear. What it does

• Provides an adjustable contact point for leveling the appliance on uneven floors.
• Restores smooth height adjustment so doors and drawers align properly.
• Reduces rocking, vibration, and movement during operation.
• Helps prevent premature wear on cabinet corners and floor surface.

• One wheel adjust foot

• Turn off and unplug the appliance before attempting any repair or adjustment.
• Use proper tools to remove the old foot and thread the replacement in by hand; do not overtighten.
• Place appliance on a stable surface and re-check level after installation; adjust as needed.

This reversible bottom plug is the small plastic cap that covers and protects the refrigerator door bottom hinge area, restoring a finished look and helping keep dirt and moisture out. It's a direct-fit replacement that snaps into place. What it does

• Covers the exposed hinge opening at the bottom of the door to improve appearance
• Helps block dust, debris and moisture from entering the hinge cavity
• Reversible design lets the same cap be used on either side/orientation of the hinge
• Simple snap-in fit for a secure, low-profile finish

• One reversible bottom plug (single hinge cap)

• Install by removing the old plug (if present) and snapping the new plug into the hinge opening
• No tools required in most installations; use a flat tool carefully if needed to pry old plug out
• Confirm orientation before final seating since the plug is reversible for left/right use
• Follow appliance safety guidelines: unplug appliance or shut off power/valve if required for safe access; avoid forcing parts

The Temperature Sensor is an OEM part for GE upright freezers. Located inside the freezer compartment, it accurately monitors and helps maintain the extremely cold temperatures required for food preservation. Without a functioning temperature sensor, proper freezing cannot occur.

Symptoms of a faulty sensor include:

• Fluctuating temperatures that do not stay consistent with the dial setting   
• Buildup of ice on interior walls and frozen items
• Warm foods and defrosting occurring in areas of the freezer

Causes can involve cracking of the glass sensor bulb from stressful temperature changes over time, dislodged wiring preventing communication with the control board, or fluid damage inhibiting accurate reads.  

Replacing with this genuine GE sensor ensures steady freezing for protecting meats and frozen goods long-term. Compatible with Hotpoint, RCA and Kenmore upright freezer models as well.