Andrew C Bloomington , IN September 20, 2014 Appliance: Model WCVH6260FWW Lots of vibration for months then a burning rubber smell when the belt broke Took off the back and found the broken belt and wiggled the pulley which was loose. Removed pulley with an adjustable wrench. Replaced with new Drive Pulley and nut from Drive Pulley Kit. Put on Drive Belt by looping it over the motor pulley then getting it started by and on the drive pulley, zip tying the belt to the drive pulley, then rotating the drive pulley. The zip tie held the belt on until I got the drive pulley around so that the belt was fully on. Then I removed the zip tie, closed the cover and it was good to go. 45 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes