Customer Questions and Answers for Seal Tape (Sealing Strip) by Whirlpool

Hello M.L., You can use a hair dryer to remove the old film and rubbing alcohol and paper towels to remove any sticky left behind.

Hello Michael. Here is a link to our Repair Forum, this is a free service to our customers. Use this link to access the repair for your question. http://forum.appliancepartspros.com/microwave-repair/255-microwave-handle.html

Hello Dan, Since the cavity is not a serviceable part, all you can do is paint the inside of the unit. The door can be taken apart but this may require the replacement of the door choke 8171846 since it normally breaks during removal. Since it is no longer available and no satisfactory substitution has been provided by the manufacturer, I would not recommend dis-assembly. As a note, if you re-paint the interior, let the paint dry naturally. Running the unit to try to dry the paint quicker will bubble the paint and prevent it from properly sticking.

Hello Abby! Unfortunately, the manufacturer does not offer a door film separate from the door on the given model number. We can not guarantee any other door film as being compatible with your appliance. Please see the following link to view your owners manual, refer to page 16 for care and cleaning. Hope this helps. Thanks! http://www.whirlpool.com/digitalassets/MLPDF/Use%20and%20Care%20Guide%20-%208206416.pdf

Hello Pat. I do not see a film. You can replace the door assembly W10471688. Here is a link to our Repair Forum, this is a free service to our customers. Use this link to access the repair for your question. http://forum.appliancepartspros.com/microwave-repair/255-microwave-handle.html

Hello Chad. Based on the model number provided, you need to order part number WB57K5229 for the unit.

Hello Patricia. Yes, based on the model number, WPW10146437 is the correct door film.

Hello Linda. No, if those are gone, you will need to order and replace the control panel on the unit.

Hello Cheryl. We will need your model number to help you with this. Please post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx

Hello Rich, The way I do it may be unconventional, but it works. Heat the tape with a hair dryer and slowly peel the tape up as you continue to heat it. It will surprise you how easy the tape comes off once you get the edge peeled up.