Refrigerator Defrost Drain Pan Parts
Genuine Ge part
By: Ge
Part Number: WR51X10055
The Defrost Heater and Bracket Assembly is an OEM replacement part for GE refrigerators. It is responsible for facilitating the defrosting process, which is essential for maintaining proper cooling and preventing excessive ice buildup within the freezer compartment.
Symptoms of a faulty Defrost Heater and Bracket Assembly include:
- Excessive frost or ice buildup in the freezer compartment
- Inefficient cooling or temperature fluctuations
- Water leaks or puddles forming inside the freezer
- Unusual noises or burning smells during the defrost cycle
Causes of a bad defrost heater and bracket assembly can include normal wear and tear over time, electrical malfunctions, or physical damage to the heating element or bracket.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.
NOTE: For a 9" double glass tube heater use WR51X10101
This part fixes the following symptoms
-
Too warm
-
Frost buildup
-
Fridge too warm
-
Freezer not defrosting
See more...
Do-It-Yourself Stories from Customers like You
Defroster in freezer not functioning causing the freezer to frost up and the fridge to not cool appropriately Eddie R. • Debary , FL • January 06, 2015
I unplugged the fridge and took all the food and shelving out of the freezer and then proceeded to take off the bottom sliding drawer rack on both sides off (4 Phillips head screws). Then took off the light bulb cover and then the light bulb. Then the back wall that covers the coils and tubes that the refrigerant runs through ( 2 screws with hex head). After sliding out the back wall I could see that the entire coil area was frosted and iced up. I took a blow dryer and melted all of it over...
Read more
More
$85.79
- Compare At:
-
$102.95
- You Save:
-
$17.16
Genuine Frigidaire part
By: Frigidaire
Part Number: 240350608
The Glass Shelf Insert is an OEM replacement part for Frigidaire refrigerators. It provides versatile storage space by allowing items to be viewed clearly and easily rearranged. This insert measures approximately 23.82 x 15.50 inches
Causes of a bad shelf insert may include cracks, chips or other damage due to repeated handling or excessive weight loads not suitable for glass. Normal wear over time can also affect the shelf surface.
Symptoms of issues include:
- Visible damage detracting from shelf appearance and function
- Increased risk of items stored atop the shelf getting damaged
- Difficulty cleaning due to cracks or irregular surfaces
This OEM replacement part is compatible with models by Electrolux, Kelvinator and Kenmore as well.
Do-It-Yourself Stories from Customers like You
Broken glass insert cover in refrigerator Donald J. • Charlevoix , MI • March 28, 2017
Part arrived in two days from order placement. Opened package , replaced glass insert in refrig.
Took about 30 seconds. Thank you for the prompt service.
Read more
More
$57.95
- Compare At:
-
$68.79
- You Save:
-
$10.84
Genuine Frigidaire part
By: Frigidaire
Part Number: 240350702
The Upper Crisper Pan Cover is an OEM replacement part for Frigidaire refrigerators. This is a cover for the upper crisper drawer or bin, helping to maintain proper humidity and freshness levels for stored fruits and vegetables. Size: Approximately 19 1/2" D X 16.9" W. Glass insert not included. For glass insert order 240350649.
Symptoms of needing to replace the upper crisper pan cover include:
- Visible cracks, damage, or warping of the cover
- Difficulty in opening or closing the crisper drawer properly
- Issues with humidity or moisture control within the crisper
Causes of a faulty upper crisper pan cover can include accidental impact or mishandling, exposure to excessive moisture or temperature fluctuations, or general wear and tear over time.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models
Do-It-Yourself Stories from Customers like You
Broken water switch on freezer door malfunction on circuit board a cracked produce drawer and drawer support Mark R. • Belle Chasse , LA • April 01, 2016
Shopped online and found your great website, read reviews and based diagnostics on similarities I saw in other peoples stories. So I was able to choose correctly when replacing the circuit board.
As far as the water switch in door, and drawer parts I just replaced them because I was tired of gluing them, and knew that with everything working good again and looking good, that it would be like a Tune up for our refrigerator.
Read more
More
$42.14
- Compare At:
-
$71.61
- You Save:
-
$29.47
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303918214
The Defrost Thermostat Kit is an OEM replacement part for Frigidaire refrigerators. This kit contains the defrost thermostat, which is a crucial component in the refrigerator's defrost system.
Symptoms of needing to replace the defrost thermostat kit include:
- Excessive frost or ice buildup on the evaporator coils
- Inadequate cooling or temperature fluctuations
- Increased energy consumption due to inefficient defrosting
- Condensation or moisture buildup within the refrigerator compartment
Causes of a faulty defrost thermostat can include normal wear and tear, exposure to extreme temperatures or moisture, or electrical malfunctions.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models.
This part fixes the following symptoms
-
Freezer not defrosting
-
Too warm
-
Fridge too warm
-
Freezer section too warm
See more...
Do-It-Yourself Stories from Customers like You
My refrigerator items were freezing Mayilet F. • Hialeah , FL • February 24, 2020
I ordered a freezer temperature control. I ordered from you because parts are certified. Last thing I wanted was to go through the replacement process with a part that didn’t work. I’m not a handy person by nature, and I have zero common sense. I watched the awesome instructional video that you provided with my order several times. Before receiving or even opening the package, I felt that I knew what to expect because I watched the video so many times. Before beginning, I made sure I had as...
Read more
More
$35.95
- Compare At:
-
$42.78
- You Save:
-
$6.83
Genuine Frigidaire part
By: Frigidaire
Part Number: 240323002
The Bottom Door Bin is an OEM replacement part for Frigidaire refrigerators. Measuring approximately 16 inches in length, 4 inches in height, and 5 inches in depth. This bottom door bin offers ample storage space for all your refrigerated items.
Symptoms of a bad bottom door bin can include:
- Scratches, cracks or deformities to the plastic material
- Difficulty sliding the bin in and out smoothly
- Failing retention clips or loose mounting hardware
Causes are usually normal wear from regular use over time. Improper handling may also cause damage.
This OEM replacement part is also compatible with models by Electrolux, Gibson, Kelvinator, and Kenmore.
Do-It-Yourself Stories from Customers like You
The bottom door bin broke Fred T. • Taylor , MI • March 20, 2014
Replaced it with a new one
Read more
More
$53.71
- Compare At:
-
$63.38
- You Save:
-
$9.67
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2188664
The Meat Pan is an OEM part for Whirlpool refrigerators. This component provides a dedicated storage area within the refrigerator, designed to keep meats at an optimal temperature for freshness. The meat pan slides in and out for easy access and helps to organize and separate meat products from other items in the fridge. The pan measures approximately 14.96" long x 16.456" wide by 7.598" high
Common causes of a bad meat pan include damage from impact, wear and tear from frequent use, or warping due to temperature changes.
Symptoms of a bad meat pan include:
- Cracks or breaks in the pan
- Difficulty sliding the pan in and out
- The pan not fitting securely in its designated space
- Food not being kept at the correct temperature
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken drawer Vern W. • Manhattan , KS • August 14, 2014
Installed replacement drawer
Read more
More
$56.95
- Compare At:
-
$67.20
- You Save:
-
$10.25
Genuine Ge part
By: Ge
Part Number: WR50X10068
The Defrost Thermostat is an OEM replacement part designed for use in GE refrigerators. This component acts as a safety device in the refrigerator's defrost system, preventing the freezer from overheating during the defrost cycle. It works by monitoring the temperature of the evaporator coil and turning off the defrost heater when the coil gets warm enough, thus safeguarding the freezer from getting too hot.
Causes of a bad defrost thermostat can include corrosion, a blown fuse inside the thermostat, or wear and tear over time, which can lead to malfunctioning of the refrigerator's defrost system.
Symptoms of a bad Defrost Thermostat include:
- Frost buildup on the back wall of the freezer
- The refrigerator is not cooling properly
- The freezer is cold but the refrigerator is warm
- The defrost heater not turning on
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Freezer not defrosting
-
Freezer too cold
-
Not dispensing water
-
Ice maker not making ice
See more...
Do-It-Yourself Stories from Customers like You
Defroster in freezer not functioning causing the freezer to frost up and the fridge to not cool appropriately Eddie R. • Debary , FL • January 06, 2015
I unplugged the fridge and took all the food and shelving out of the freezer and then proceeded to take off the bottom sliding drawer rack on both sides off (4 Phillips head screws). Then took off the light bulb cover and then the light bulb. Then the back wall that covers the coils and tubes that the refrigerant runs through ( 2 screws with hex head). After sliding out the back wall I could see that the entire coil area was frosted and iced up. I took a blow dryer and melted all of it over...
Read more
More
$18.72
- Compare At:
-
$24.73
- You Save:
-
$6.01
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10326469
The Center Rail is an OEM part compatible with Whirlpool refrigerators. It plays a crucial role in providing structural support and stability for the shelves and drawers within the refrigerator compartment. This rail measures approximately 14.1 x 2.6 x 1.5 inches.
Causes of a bad refrigerator center rail can include physical damage from impact or excessive force, warping due to temperature fluctuations or moisture over time, or general wear and tear from repeated use.
Symptoms of a bad center rail include:
- Shelves or drawers becoming misaligned or difficult to slide in and out
- Excessive wobbling or instability when shelves or drawers are loaded
- Visible signs of damage, such as cracks or bends, on the center rail itself
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken main crisper drawer frame and center rail Rick N. • Richland , WA • August 29, 2015
No instructions are included with either piece, which makes installation take more time and care.
Tools needed: Small standard flat blade screwdriver, box knife or other knife with at least a 2" long blade, super glue.
Remove the old main crisper frame:
1. Remove old main frame by lifting upward and outward.
2. Remove the center rail from the frame. May require bending of the main frame to remove
it.
3. Remove the crisper front panel by unsnapping from frame. This is easily done by...
Read more
More
$23.95
- Compare At:
-
$28.50
- You Save:
-
$4.55
Genuine Frigidaire part
By: Frigidaire
Part Number: 241993101
The Front Crisper Cover Support is an OEM replacement part for Frigidaire refrigerators. It is a component that provides structural integrity and support for the crisper cover or glass shelf located in the refrigerator's crisper drawers.
Symptoms of a faulty Front Crisper Cover Support include:
- Sagging or misaligned crisper cover or glass shelf
- Difficulty in opening or closing the crisper drawers
- Visible cracks, breaks, or damage to the support itself
Causes of a bad front crisper cover support can include normal wear and tear, physical impact or mishandling, or exposure to excessive moisture or temperature fluctuations.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models.
Do-It-Yourself Stories from Customers like You
Broken slide connections on shelf support replaced shelf support "cover" front and rear cover supports. Scott R. • Deephaven , MN • April 04, 2023
If you can't pull out the displacement pins on the crisper cover support clips that allow the wall to carry the weight of the cover, slides and drawer, you may need to push those pins in (they fall down the wall) to remove the clip. During the replacement of both front clips, I had one I could remove and one I had attempted to drill a tiny hole in to be able to pull the pin. Ultimately it did not work and needed to be simply pushed in. Do not worry, there is nothing below which the plastic...
Read more
More
$10.95
- Compare At:
-
$12.92
- You Save:
-
$1.97
Genuine Frigidaire part
By: Frigidaire
Part Number: 240530601
The Meat Pan Hanger is an OEM replacement part for Frigidaire ovens and ranges. It is a handy accessory designed to support and securely hold meat pans or other oven-safe cookware during the cooking process. The hanger measures approximately 16.65 inches in length by 1 inch in width.
Symptoms of needing to replace the meat pan hanger include:
- Visible signs of wear, warping, or damage on the existing hanger
- The hanger becoming unstable or unable to securely hold cookware
- Difficulty in inserting or removing the hanger from the oven racks
Causes of needing a new meat pan hanger can include normal wear and tear over time, exposure to high temperatures, or physical damage due to accidental dropping or mishandling.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore ovens and ranges. For the right-hand side order 240530701.
Do-It-Yourself Stories from Customers like You
Broke my meat pan hanger Curtis H. • Onalaska , WI • April 02, 2014
I ordered a replacement part. Emptied the top shelf then took the shelf out. Flipped the shelf over and removed the screw holding the broken piece. Put the new piece in its place replaced screw. Put the shelf back in and then put the mean pan back on the hangers.
Read more
More
$49.95
- Compare At:
-
$59.94
- You Save:
-
$9.99
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10225581
The Defrost Thermostat is an OEM part for Whirlpool refrigerators. It is responsible for monitoring the temperature of the evaporator coils. When the coils reach a certain temperature, the thermostat signals the defrost heater to turn on and melt any ice or frost buildup. This ensures proper airflow and prevents excessive ice formation.
Causes of a bad defrost thermostat can be attributed to normal wear and tear over time or electrical malfunctions.
Symptoms of a bad defrost thermostat include:
- Excessive ice buildup in the freezer section.
- Inadequate cooling in the refrigerator compartment.
- Frost or ice accumulating on the evaporator coils.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Frost buildup
-
Freezer not defrosting
-
Freezer section too warm
-
Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You
Fridge side wasn't staying cold massive ice build up in freezer ice blockage in fan duct Christopher M. • Yorba Linda , CA • December 15, 2014
Condenser was encased in solid block of ice due to automatic defrost not working. Replaced thermostat and ADC control board. Working fine now. Most tedious part was using a heat gun to melt all the ice off the condenser coils.
You will need a couple small wire nuts to splice the new thermostat into the existing harness (they are not included).
Service tech wanted over $400 to repair, fixed it myself for half that. Thanks !
Read more
More
$33.95
- Compare At:
-
$40.74
- You Save:
-
$6.79
Genuine Frigidaire part
By: Frigidaire
Part Number: 240364787
The Refrigerator Crisper Drawer Cover is an OEM part for Frigidaire refrigerators, designed to offer a stable platform for the crisper drawers, providing organization and storage capacity. This part supports the crisper drawers and helps to maintain the ideal humidity level to keep fruits and vegetables fresh longer.
Causes of a bad Refrigerator Crisper Drawer Cover can include cracks or breaks from heavy items being placed on top, warping due to temperature variations, or normal wear and tear over time.
Symptoms of a bad Refrigerator Crisper Drawer Cover include:
- Difficulty sliding the crisper drawers in and out.
- Visible cracks or damage leading to items falling through.
- A decrease in fruit and vegetable storage options.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken crisper pan cover and crisper pans Jennifer W. • Medford Lakes , NJ • November 22, 2016
I ordered a replacement Crisper Pan Cover and two Crisper Pans. Your price was the best and parts were delivered in two business days. The parts were generously wrapped in heavy duty bubble wrap. I removed the glass from the original (badly cracked) Crisper Pan frame and popped it into the new one. That took barely a minute...and then the new drawers slid right in.
Read more
More
$84.28
- Compare At:
-
$101.14
- You Save:
-
$16.86
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2187172
The Door Shelf Bin is an OEM part for Whirlpool refrigerators. This bin attaches to the inside of the refrigerator door, offering convenient storage for condiments, bottles, and other small or frequently accessed items. By maximizing the usable space within the refrigerator, this door shelf bin helps keep your refrigerator organized and items within easy reach.
Common causes for these issues can stem from overloading the bin beyond its weight capacity, accidental damage from items being placed too forcefully, or the natural aging of plastic materials leading to brittleness and cracks.
Symptoms of a failing Door Shelf Bin include:
- Cracks or breaks in the plastic
- The bin becoming loose or failing to attach properly to the door
- Visible warping or deformation
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Broken Shelf Bin Holly W. • Fruita , CO • March 24, 2014
Took broken bin out and replaced with new one.
No tools were required ( for the next section since it won't allow me to only select other).
Read more
More
$40.95
- Compare At:
-
$48.73
- You Save:
-
$7.78
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10710203
This door bin is an OEM replacement part for Whirlpool refrigerators. It holds small items like condiments. It helps keep them organized inside your side-by-side refrigerator. Sourced directly from Whirlpool. This makes it the perfect size to store various items.
The most common reason to replace a shelf bin is that it is damaged or missing, causing food to fall out of the door. This new, genuine OEM refrigerator part is designed to fit and function like the original part. Remove the existing drawer and replace it with this item. No basic hand tools or repair experience is required. Keep your refrigerator organized and free of clutter with this durable and high-quality gallon door bin.
NOTE: The bin measures approximately 18 inches wide and 7 inches deep.
Do-It-Yourself Stories from Customers like You
Door bin was knocked off and broke. Jason P. • Fayetteville , NC • March 12, 2014
I ordered a replacement bin, and since the price was reasonable I ordered a second one to help with organization in my refrigerator. I thought it would be a week for the bins to arrive, but it only took three days(one of those was a Sunday).
Read more
More
$33.95
- Compare At:
-
$40.74
- You Save:
-
$6.79
Genuine Frigidaire part
By: Frigidaire
Part Number: 215846602
The Defrost Timer is an OEM part for Frigidaire refrigerators. It is an essential electronic component that controls the automated defrost cycle of the refrigerator. The defrost timer monitors run times and temperatures to determine when to initiate the defrost process. It allows the refrigerator to operate efficiently by preventing excessive ice buildup. This defrost timer is designed to run for 30 minutes every 8 hours.
Symptoms of a bad defrost timer include:
- Inability to initiate or maintain the defrost cycle
- Excessive ice buildup in the freezer compartment
- Erratic temperature fluctuations
- The refrigerator running excessively or displaying other performance issues
Causes of a bad defrost timer can be normal wear and tear over time. Environmental factors like power surges or fluctuations may also impact the electronic timer functionality.
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
This part fixes the following symptoms
-
Frost buildup
-
Fridge runs too long
-
Freezer too cold
-
Freezer not defrosting
See more...
Do-It-Yourself Stories from Customers like You
Not cooling properly eventually evaporator fan failure Richard D. • Wood Ridge , NJ • April 25, 2016
My problem first showed up as varying temperature in both sections of my old mid 1970’s Frigidaire model FPCI-170T-7 refrigerator, which is not listed on most appliance repair databases.
Running on the warm side from time to time, as well as sudden fan noise (probably the fan blade hitting ice build-up on the evaporator coil) alerted me to a possible defrost system problem, since the compressor was cooling. The evaporator fan eventually failed after a day or so, and a major repair was...
Read more
More
$37.95
- Compare At:
-
$45.54
- You Save:
-
$7.59
Genuine Frigidaire part
By: Frigidaire
Part Number: 240535201
The Door Shelf Bar is an OEM part for Frigidaire refrigerators. This bar attaches to the door, providing a secure front barrier for door shelves to help hold items like bottles, jars, and condiments in place. It enhances the storage capacity and organization of the refrigerator door, ensuring that items do not fall out when the door is opened or closed.
Over time, the bar can crack, warp, or break due to frequent use, overloading, or accidental impacts. A compromised door shelf bar can result in items falling out, leading to spills and reduced storage efficiency.
Symptoms of a bad Door Shelf Bar include:
- Cracks or breaks in the bar
- Difficulty attaching the bar securely to the door
- Items falling out or not staying in place
- Reduced storage capacity on the door
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken rack doors Terry J. • Golden , CO • March 14, 2015
After some time the two bottom rack doors cracked from over-loading. Browsed for replacements and hafta tell you that this site is marvelous. Not being an expert, just put in my model number and found Appliance Parts Pros. The site is world class, model compatibility, photos and even videos for instructions. Prices were competitive and shipping was crazy fast. My new go-to site for appliance repair.
Read more
More
$30.77
- Compare At:
-
$32.97
- You Save:
-
$2.20