Dvm133 Parts

This gas sensor monitors moisture levels during sensor-cook cycles so the control can adjust time and power for consistent results. Replacing a failed sensor restores reliable sensor-cook performance. What it does:

• Detects steam/vapor inside the cavity and sends feedback to the control board
• Helps the appliance automatically set or adjust cooking time on sensor settings
• Failure symptoms can include sensor-cook not starting, stopping early, or running too long
• May trigger "Sensor" or general error messages related to sensor-cook functions

• Disconnect power before servicing; if working on a microwave, discharge the high-voltage capacitor
• Access is typically behind the control panel or air channel; avoid touching/contaminating the sensing surface
• Transfer any mounting clips/brackets and ensure the wiring connector is fully seated
• After installation, run a simple sensor-cook test to confirm operation

Made by GE. This microwave stirrer motor comes with a square shaped shaft and is usually located in the upper part of the microwave. For a D shaped shaft turntable motor order WB26X10038.

This glass light cover shields and diffuses the cooktop light, protecting the bulb from heat, grease, and splatter while maintaining clear, even illumination over your cooking surface.

• Covers and protects the cooktop light bulb
• Diffuses light for more even illumination and reduced glare
• Helps keep grease and debris out of the light cavity
• Replace if cracked, missing, discolored, or not staying secured

• Disconnect power to the appliance before servicing and allow the area to cool
• Support the cover while removing any retaining screw(s) or release tabs
• Reuse original hardware/clips as applicable and seat the cover fully
• Restore power and test the light for proper operation

This holder nut assembly secures a component to the appliance frame, restoring proper mounting and reducing vibration or movement. Replace a damaged or missing holder nut to keep connected parts stable and functioning. What it does:

• Secures a component or assembly to the appliance frame or mounting bracket
• Prevents looseness, rattling, and misalignment caused by worn or missing mounting hardware
• Restores a safe, stable connection that helps maintain normal operation
• Matches OEM mounting geometry for a direct replacement when the original nut is damaged

• Disconnect power to the appliance before servicing to avoid shock or injury
• Access the mounting area by removing the appropriate panel or cover per your model's service instructions
• Start threads by hand to avoid cross-threading, then tighten with the correct tool; do not overtighten
• If any fasteners or nearby components are damaged, replace them as needed for a secure installation

This latch body is the plastic housing for the door interlock system. It holds the door switches in position and guides the door latch so the appliance can sense when the door is closed and operate safely.

• Holds and aligns the door interlock switches
• Guides the latch to properly engage/disengage when the door opens and closes
• Can help resolve issues like the unit not starting, running with the door open, or showing door error messages
• Restores proper, safe door sensing and operation

• Unplug the appliance to disconnect power before servicing
• Access is typically from the front; remove necessary panels to reach the latch body and switches
• Transfer switches and hardware from the old housing to the new one as configured
• Verify correct switch orientation and secure mounting before reassembly and testing

Restore a solid, comfortable grip on your microwave door. This door handle assembly replaces a cracked or loose handle, making the door easy to open and refreshing the stainless look of your appliance.

• Provides the handhold used to open and close the microwave door
• Replaces broken, cracked, or wobbly handles
• Helps maintain smooth door operation and proper latching
• Matches the stainless steel finish on compatible models

• Unplug the microwave before servicing
• Carefully remove the inner door trim/bezel to access the handle mounting screws; protect the glass and support the door
• Reuse the original mounting screws and tighten evenly without overtightening
• After reassembly, verify the door opens/closes smoothly and latches properly

This temperature control thermostat regulates refrigerator temperature to help keep food cold and maintain proper cooling cycles. Replaces a failing mechanical control to restore consistent compressor on/off operation. What it does:

• Senses cabinet temperature and signals the compressor to cycle on and off
• Helps correct symptoms like inconsistent temperature, fridge running constantly, or not cooling
• Works with mechanical capillary-style temperature control systems
• Restores user control over interior temperature settings

• Disconnect power to the appliance before starting any repair
• Handle the capillary tube and sensing bulb carefully—avoid kinks or sharp bends
• Verify proper routing and secure mounting of the bulb per the original layout

This magnetron assembly produces the microwave energy used to heat food and includes a built-in thermal cutoff for overheating protection. Replacing a failed magnetron restores heating performance and safe operation in microwave ovens. What it does:

• Generates high-frequency microwaves that cook and warm food.
• Thermal cutoff helps stop operation if the magnetron overheats.
• Commonly replaced when the oven stops heating, heats intermittently, or has weak heating.
• If the oven produces loud humming, arcing, or unusual burning smells.

• Disconnect power and unplug the appliance before service.
• High-voltage components (magnetron and capacitor) can retain lethal charge — discharge the capacitor and follow safety procedures.
• Handle the magnetron carefully; avoid touching terminals or the ceramic output window.

This fan motor spins the oven/convection fan to circulate heat for even cooking and help exhaust hot air. Replaces a worn or noisy motor to restore proper airflow and temperature consistency in the appliance. What it does:

• Drives the convection/circulation fan blade to move air through the oven cavity
• Helps maintain even cooking and consistent oven temperatures
• Reduces buzzing, grinding, or failure-to-spin symptoms when the old motor is failing
• Works as the mechanical drive for air exhaust and internal circulation systems

• Disconnect power to the appliance before servicing to avoid electrical shock
• Handle the motor and wiring gently; match mounting orientation and connector type during install
• Verify blade and shroud clearance before powering the unit

This high-voltage transformer supplies the elevated voltage needed by the magnetron to produce microwave energy. Replacing a faulty transformer restores heating performance and reduces risk of electrical faults in the oven. What it does:

• Converts line voltage to the high voltage required by the magnetron to generate microwaves.
• Can cause no-heat conditions when failed; replaces a transformer that no longer powers the magnetron.
• Works with the HV capacitor and diode as part of the microwave high-voltage circuit.

• Disconnect power at the house breaker and unplug the appliance before servicing.
• The high-voltage capacitor can hold a dangerous charge—discharge it properly before touching HV components.
• Use insulated tools and avoid contact with transformer terminals; refer to the service manual for wiring and mounting details.

This cover-damper is the replacement plastic cover that fits over the refrigerator air damper to help direct cold air between compartments for more consistent cooling. Replaces a cracked, broken or missing damper cover. What it does:

• Protects the damper assembly and helps channel airflow from the evaporator to the fresh-food and freezer compartments
• Restores proper air direction when a broken cover causes uneven temperatures or poor cooling
• Works with the damper to reduce drafts and improve compartment temperature balance
• Simple, passive part that mounts to the damper housing

• One cover-damper

• Disconnect power to the appliance before starting any repair
• Remove interior panels or shelves as needed to access the damper housing; handle plastic clips gently to avoid breakage
• Verify fit and orientation against the existing part before finalizing installation
• If the damper motor or actuator is damaged or the issue persists after installing this cover, inspect the full damper assembly

This motor ventilation part is the replacement vent fan motor that moves air through the appliance for proper cooling and exhaust. Replacing a failed vent motor restores airflow and helps the appliance maintain safe operating temperatures. What it does

• Spins the ventilation fan to move air for cooling or exhaust
• Helps prevent overheating by promoting proper airflow
• Can stop symptoms such as reduced or no exhaust, weak airflow, or abnormal motor noise
• Works as the airflow drive component in the appliance's ventilation system

• Disconnect power to the appliance before starting any repair
• Basic mechanical skill and common tools are usually required; refer to the service manual for disassembly instructions

This washered screw secures panels and internal components where a combined screw-and-washer fastener is required, restoring proper fit and stopping movement or rattling. Simple replacement with the correct fastener keeps assemblies aligned and stable. What it does

• Secures panels, brackets or components where a washered screw is specified
• Replaces missing, stripped or corroded fasteners that allow vibration or gaps
• Helps stop rattling, loose panels or misaligned parts caused by a failed screw
• Provides a sealed bearing surface to distribute load and prevent pull-through

• One washered screw

• Disconnect power and/or water to the appliance before starting any repair
• Use the correct screwdriver or bit to avoid cam-out and fastener damage
• Align parts before tightening and snug; avoid over-tightening which can strip threads or crack plastic